Fluids

Wire, X-Axis PNC2300A\EGX300

Wire, Y-Axis CS-20, EGX30 (ea., 2 on Machine)

 Right & Left Side, 74"/188cm

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.

Wrench, Tool Spanner 6-14 CS-20/EGX-30/EGX30a/EGX20

* This Tool Spanner (Product #21935115) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-20 engraver.

Y-axis belt (S2M-W9-T774) Expert-24

Stellar Mark I-series, ND:YVo4
Diode pumped, Q-Switched, YVO4 Marking and Image Engraving s

GCC 20600066  Y axis carriage belt   Puma 60  (2GT-T779-W9)   

1704002 Purex , IFume 400I - Orange

Purex Commercial Grade Fume Extraction System for Hand or Machine Soldering
 

650 Dental, Vacuum Control 120V (080470D+HOOD KIT), 120v

VERSIONS:

Vacuum Control 230v. 080465D-HOOD KIT

Vacuum Control 120v. 080470D-HOOD KIT

650 w/arm and hood kit includes:
120199, 650 HOOD KIT
113505, MAIN FILTER - HEPA CHEMICAL
200025, PRE-FILTER - PAD SINGLE 362mm x 362mm

 650 Vacuum Control Brochure

Export Notes:  HTS code: 8421.39.0115, Made in the UK-England

Freight Class: 125, NMFC# 069100-03

• Clear & informative graphic display • Highest grade HEPA and carbon technology

• Automatic electronic flow control - maintains a constant extraction rate even as the filter blocks

• Gas and particle sensors to warn the operator

• Up to 2 large hoods

0LX3001 Purex, 300i Volume Control Digital Fume Extractor  120v.

0LX3003 Purex 300i Volume Control Digital Fume Extractor  230v.

Purex Commercial Grade Fume Extraction System for Laser Marking Systems & Other Appl.

This machine can cater for:

Bracket, Mirror Prism Mounts Assy For: C180/X252/SI/GLS/SGE/SGX/SLS/X380/S290/Explorer (for ALL the optics, Mirror 1, 2, 3), Mercury 30/40-mirror 1 & all Mercury-red beam mirror
Replaces: 20200185G

Spray 12 Oz.
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare materials surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

SHIP NOTE: This product SHIPS UPS\FEDEX GROUND ONLY to the 48 contiguous states. Products shipped via air to Hawaii or international destinations will be subject to additional hazardous materials charges. This is due to regulations on shipping pressurized cans on aircraft.Shelf Life And storage Information Production Date: Click On Image

 New Ultra coverage

Weight: 50-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare materials surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

   Data Sheet

 New Ultra coverage

Cermark Ultra Black
Weight:  250-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Cermark Ultra Black 500-Grams

CerMark LMM6000, Black Use: Stainless Steel  & Pewter, 500gram.

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick, and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Weight: 1000-Grams
Use: Metals, Ceramics, Glass and More
HTS Code: 320710000000

CerMark Ultra will mark at up to 80% faster speed compared to LMM 6000 on stainless steel.  The coating will also make marks on all metal types as well as glass, ceramic, stone, slate, brick and other hard surface items.

For use directly on a bare material's surface.  May not work correctly on painted or coated surfaces. Not intended for use on plastics or wood.

  
Data Sheet

 New Ultra coverage

Cermark LMM14, Thermark Black 50grams-1.75oz
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~800SQ" Coverage

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 250grams-.55Lbs
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~5000SQ" Coverage
HTS Code: 320710000000

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Cermark LMM14, Thermark Black 500 Grams-1.1lbs

 SDS for Cermark LMM14

 LMM14  coverage

Weight: 1000grams
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals
HTS Code: 320710000000

LMM14 is one of TherMark’s two general-purpose laser marking inks and is recommended for creating a black mark on most metals. The combination of its flexible process window and wide range of applicable substrates makes LMM14 an extremely easy product to use. In general, if you are looking for one laser marking product to keep on your shelf, we recommend LMM14.

LMM14 dries quickly as a light-gray powder coat and is extremely easy to wash after laser marking. This coat should not be extensively handled prior to laser marking, however, so LMM14 should be marked shortly after application.

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 50gram
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

 LMM-6000 coverage

Weight: 100gram
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

 LMM 6000  coverage

Weight: 250grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

SDS (Spanish Doc). For Cermark LMM6000  

 LMM-6000 coverage

LMM6000- 1000grams is on backorder until Nov. 18th 2022

Weight: 1000grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. LMM6000 has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with LMM6000 to be stored, moved, or stacked prior to laser marking. 

SDS For Cermark LMM6000

 LMM-6000 coverage

Tape Notes: Black Marking, for Metal, 1"x50 ft Roll  6 oz
Export Notes: HTS#: 3824.99.9297

Tape Notes: Black Marking, for Metal, 2"x50 ft Roll  10 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 2"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

Tape Notes: Black Marking, for Metal, 3"x50 ft Roll 1 lb
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

DM5975-DuraBlack, Matte Black .020"- 12"x20"  With Adh. 
* Call us about GOV-GSA Discount if you are a military or Government agency
With DuraBlack™ Marking on Laser Markable Aluminum is possible without a protective topcoat. DuraBlack™ is the long-term solution to protecting your government or business assets for the entire life cycle of your equipment even in harsh operating environments.

• Matte Black
• With Performance Adhesive backing
• .020 Inch Thick
• 12 x 20 Inch Sheets
• 5 Sheets Per Box

OUTDOOR DURABLE CO2 LASER MARKABLE ALUMINUM.

DuraBlack is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. In side-by-side tests, DuraBlack outperforms black anodized aluminum and laser markable acrylic tape in select applications. DuraBlack is resistant to sunlight (UV-radiation), abrasion, high-temperatures, salt-spray and chemical exposure. Because of its ability to perform across a range of challenging environments, DuraBlack meets several government, industrial and military specifications including MIL-STD 130N, A-A-50271 (≈MIL-P-514D) and MIL-STD-15024F, Type L.

Composed of a multi-level coating on anodized aluminum, DuraBlack can be attached to either curved or flat surfaces with adhesive, rivets or screws. It is imaged with any CO₂ marking laser to produce a durable, high-resolution barcode or human-readable image.

DM05976-DuraBlack, Matte Black .020"- 20"x24" No Adh.

DM05977-DuraBlack, Matte Black .020"- 20"x24" With Adh.

Weight: 50gr.
Use: Stainless Steel  & Pewter
HTS Code: 3207.10.0000

Is a specifically formulated water-based product designed to perform the same as the LMM-6000, The LMM-6060 is an all-in-one metal marking product.  The LMM-6060 will not work on metals with a lacquered coating. The LMM-6060 has improved adhesion for difficult to stick to surfaces such as high polished aluminum or stainless and chrome.  Dries to a tough film that can be handled. Coated parts can be stacked. Recommend starting point for settings
CO2: 90-100% Power (35 Watt Laser), 15-30% speed, 500 DPI / 500 PPI.  Fiber: 10-25 Watts, 10-20 Inches/Sec Speed.

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

60-Min. 1-On-1 Diagnostic Phone Call Support, Per Case Troubleshooting Evaluation (Equipment Not Purchased from Jorlink)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

Compressor for Air Assist-Medium Volume Laser Engraving Applications, 115Vac, 1/6HP Oil Free Twin Cylinder, Max. 80PSI (Working Pressure: 0-60PSI, Flow: 1.14CFM)
One (1) Year Manufacturer's Warranty if purchased.

Exhaust \ Blower, 850-914 CFM, 62db, 110vac, 4" In\Outlet with Two (2) Years Warranty
* Suitable for Laser Systems up to 40”x26” Table Size
** Wired for 110vac, this can also be re-wired for 220vac with new plug by client

MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided

Quatro- F071  '2" Pleated pre-filter, sold box of 6

 F071 filter Specifications

• MedicAir
• SolderPure
• AF400
• SPH400
• SPH800

For CSA626L-S4S4-EA-8 and 626 I-Series
DIM's: 4 Lbs @ 13x16x3"
HTS#: 8421.39.8015, Origin: USA

GCC LaserPro Unveils SmartEYES™ CCD for S400

As one of the leading manufacturers of equipment for the visual communication industry, GCC is thrilled to launch GCC SmartEYES CCD for S400 laser engraving machine.

AR-24 Stand

 290090440G Stand Assembly Including Package for the best choice in a beginner cutting plotter.

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Panel Board 1 Right Side Bottom EGX-20, Button Control (#34 Image)

Cap Head Replacements, Nose Cones for MPX90 (5pcs)

Cap Head Replacements, Nose Cones for Roland Metaza MPX90 (2pcs)

Adapter, Vacuum Remote Adapter 3.5mm Cord/24VDC, Roland Mill or Engraver Communication Remote (#11054)

EXPERT II-24

Cutting Plotter, GCC Expert II, 24", One-year Limited Manufacturer's Parts

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.

For detailed information please visit: GCC World

Motor, X-axis (Mercury, Venus, X252, X380, X500-II, X500-III, Hansen Motor 116-33224-8)
* 3-Months Manufacturer's Warranty
(BK01359C, Hansen Motor 116-33224-)

Motor, X-axis (GCC Vinyl Cutter Puma II & III (132cm\52" Model)

* 3-Months Manufacturer's Warranty

(BK01359C, Hansen Motor 116-33224-)

Paper, Lens Cleaning Tissue Paper For Laser Optics Cleaning (FKA Kodak Lens Tissue, 50 pck, GCC# 26500192)

60-Min. 1-On-1 Diagnostic Phone Call Support, Per Case Troubleshooting Evaluation

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

Adaptor, Burnisher, Inside Spring, 11/64"

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 120 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 90 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

Mirror, #1, 1" Diam-Round. with Prism Bracket (Explorer I, SLS, SI, GLS, SGX, SG, SI Option, Mercury III, H230, H230CS, replacement for #29003695G, #290077670G + 202003240G | for machines shipped from TWN before 2013 August, Before Serial # M50659)