Diamond & Burnishing Cutters

Burnisher, .005 Tip, 11/64" Dia. x 6.5" LG

Burnisher, .010 Tip, 11/64" Dia. x 6.5" LG

Burnisher, .015 Tip, 11/64" Dia. x 6.5" LG

Diamond, 1/8" Dia. x 5" LG, 90DG w/o Knob (Epoxy Pens) for Roland Engravers

Rotary Tools – Cutters Brochure Specs

 Comparison Chart

EngraveLab Expert with Braille Ver. 10 Software for Rotary Machines (1 License with Dongle)

Includes all the Foundation tools plus advanced features to make the complete text composition, design, layout and production package for experienced engravers.

Increase your design potential with easy node editing of scanned customer artwork. Type text with on-screen display of the text properties and easily fit text on a complex path or arc. Use automated engraving fill routines to increase the impact of text, logos and artwork. Let EngraveLab Expert do the work with enhanced spell check support. The badging routine reduces layout time and improves production by automatically substituting text from a variable list. EngraveLab Expert is your ADA solution. Generate Grade 2 Braille with appropriate spacing to meet ADA specification. EngraveLab Expert is fully compatible with the Rasterâ„¢ Method of Braille, where precise placement of Rastersâ„¢ is done with a single point drill function. As with regular text, Braille can be badged and serialized.

You can chek the trial version on the following link: http://www.cadlink.com/products/engraveLab/el_trial.php 

Compatible Machines 

Jig, Roland Metaza MPX-95, MPX-90. MPX-80 Center Vise

Kit, Starter Kit Cutters 1/8" for Roland Engravers (EGX20, EGX30A & EGX300, EGX350, DE-3)
Includes: .010", .015", .030", Diamond Tip, Holder-Cutter
* Manufacturer reserves the right to change certain items on this cutter kit USTL125KIT

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

MultiMat, SEKLEMA Engraving Table Hold Down MAT, 12"x24" Double Sided

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Adaptor, Burnisher, Inside Spring, 11/64"

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 120 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

Adaptor, Diamond Drag Assembly 90 Deg. with a 1/8" x 1" Diamond

Rotary Tools – Cutters Brochure Specs

MultiMat-Seklema-White, 12"x12" (30.5cm) DOUBLE Sided, Engraving Table Hold Down Mat

SRM-20 Kit

Includes:

Vectric software SRM-20 , Diamond Drag , Tooling , V-Bit Tooling , 1/4” and 1/8” Collets , Bed Offset Hardware , Indexing Fixture , Centering Vise , AS-10 Sheets

Shear, 12" Modular- Combo (Plastics & Metals)

* Select between Metric or Imperial Guide Rullers

Swatch Book, IPI Plastics Sample Book

Includes: Sample Chips (1" Squares) of Each IPI Rotary and Laser Color Options, Engraved Samples

Burnisher, .010 Tip, 1/8" Dia. x 4.5" LG For Roland Engravers, BT-125-010

Rotary Tools – Cutters Brochure Specs

Burnisher, .015 Tip, 1/8" Dia. x 4.5" LG For Roland Engravers, BT-125-015

Rotary Tools – Cutters Brochure Specs

Cutter Knob 1/8" For Roland Engraver
Manuf. #: C2-125-KNOB

Rotary Tools – Cutters Brochure Specs

Cutter, Parallel, .100 Tip, 11/64" Dia. x 6.5" LG (AC-171-E.100)

Rotary Tools – Cutters Brochure Specs 

Cutter, Parallel, .171 Tip, 11/64 Dia. x 6.5 inches

Rotary Tools – Cutters Brochure Specs 

Wrench, Cutter Wrench  Hexagonal . All Roland Machines  (AllN) 2mm

Wrench, Cutter Wrench for 11/64" or 1/4" Standard Cutters

Brass, Black Laserable Brass Gloss 12" X 24" .016" (Black Front\Gold Background)

Laserable Brass is recommended for laser engraving, although diamond drag or burnishing will also work. Lettering will be gold.

Recommended laser settings: Speed ~ 100 Power ~ 60 (35 watt laser)

Engraveable? Yes
Sublimatable? NO
Laserable? YES
For Outdoor Use? NO

• Thickness 0.016" Inches
• Size 12"x20" Inches
• No Adhesive Backed

Clamp, Pivot For Roland or Other Manufacturers Rotary Engravers

AS-5 By Roland, Adhesive Sheet Hold-down System (Pack of 5)

Beveler, Cutter 1/4" Industrial ABS Plastic Material Beveler (2-Year Warranty, Made in the USA)

Beveler, Cutter 11/64" Industrial ABS Plastic Material Beveler (2-Year Warranty, Made in the USA)

Diamond, 1/8" Dia. x 5" LG, 120DG w/o Brass Knob for Roland Engravers (Std Marking, Replaces: C2-125-DGK - ZDC-A2000)

Rotary Tools – Cutters Brochure Specs