FAQ - How do I use Adobe Acrobat reader DC to output to LaserPro products?

How do I use Adobe Acrobat reader DC to output to LaserPro products?

Note:
For cutting jobs, the cutting line width should be 0.001mm (set to hairline is not enough).

1. Use Adobe Acrobat reader DC to open pdf files. Then click File/Print.

2. Select GCC LaserPro driver (in this case is Spirit 4.08-01) and then click properties (the red circle below).

3. Set the proper power and speed and other parameters and then click print.

4. Make sure that the Advanced tag has the settings seen in the attached article document.