CerMark Ultra use
How to use Cermark Ultra without problems
How to use Cermark Ultra without problems
CerMark ULTRA is specifically formulated to laser mark on most laser markable substrates such as metals, glass, ceramics (glazed or
unglazed), stone, brick (glazed & unglazed), slate and more using just one CerMark product. This new product is by far superior to
our existing product line formulated to achieve the best results in the industry.
CerMark ULTRA is ethanol based which allows for a faster drying time.
Using CerMark ULTRA:
CerMark ULTRA is ready to use in aerosol can form. IMPORTANT: Shake can well before using. Allow the agitator ball to rattle for
at least 2 minutes. Failure to shake thoroughly can result in the failure of the aerosol system. For best results, use when aerosol is
between 70 and 90 degrees F.
Strengths of Product
Allows CO2, YAG, and Fiber lasers to mark the follow substrates: Uncoated metals such as stainless, brass, aluminum and more
as well as ceramics, glass, porcelain, brick and more. Produces high contrasting, highly durable marks; fast drying; will not
stain sensitive metals such as brass, nickel and others.
Laser marking metals:
A variety of bare metal substrates including stainless steel, brass, aluminum, titanium, tin, copper, nickel and more.
Applying:
Clean the surface of the metal so that it is free of any type of lubricants or oils. Hold can approximately 8-12 inches from substrate to
be sprayed. Depress valve fully during spray. Apply a thin coat of CerMark ULTRA to the metal, apply an even coating. Try to cover
the area to be marked with a light spray, using two passes. For high quality results it’s important for the CerMark ULTRA to be
applied evenly across the marking area. Applying CerMark ULTRA may require practice to achieve the right coverage. After use, the
can nozzle should be cleaned to eliminate residue to avoid a clogged nozzle. We recommend that all CerMark ULTRA be applied in a
well-ventilated area or spray booth designed to pull air away from user.
Drying:
It is important that the CerMark ULTRA is allowed to dry thoroughly. It will air dry in about 2 minutes. For best results do not force
dry coated parts which includes using air blower or fan.