Question-Why is the LMC12 not available?

 Answer- That product is no longer being manufactured by the Ferro company. There's really not a product that will work for that application well. We recommend using a Fiber laser source for plastic applications. 

Question-Why is the LMC12 not available?

 Answer- That product is no longer being manufactured by the Ferro company. There's really not a product that will work for that application well. We recommend using a Fiber laser source for plastic applications. 

Question-Why use Cermark products on laser engraving Yeti cups?

Answer- When we use a laser marking technique with a Cermark product, if it is applied in the proper manner and with the proper settings for your machine and substrate, this means that the marking material will be affixed to the substrate, so we will create a permanent finish on the outside of your cup. This means that as long as your custom YETI is in one piece, so is your personalization. This process creates the most premium and durable finish that will not crack or peel over time. It also ensures a quality personalization process.

Quesstion- Will the Cermark tape  LMM6018.LF  work on stainless with a Fiber Laser?

Answer- Relate to inquiry, unfortunately the Cermark tape will NOT work in regular conditions with a fiber laser. Most fiber lasers are able to mark on stainless steel without any additives.  However, the LMM-6018 Tape will work on stainless using a fiber laser if the following applies:

• The Fiber laser must be (CW) continuous wave laser.

• Or if this laser system has a Q-switch capability then select CW not pulse.

• Or if not CW the laser system and offers only pulse mode the system must have the ability to increase the frequency to more than 160,000 which should enable the laser system to mark using LMM-6018 Tape.

With Co2 the power must be 40 w or higher

Question- What Is The Warranty And Expiration Date Of Cermark Products (Lmm6000) ?

Answer- The Date Of Manufacturer Will Depend On The Container At Time Of Sale, Our Products Move Very Quickly And They Don’t Sit For More Than 2-Weeks Or Less. The Product Has Been Known To Last For Over Two (2) Years, But Its Guarantee By Manufacturer For Six (6) Months. I Trust These Answers Your Questions.

CerMark LMM6000, Black 50gram, Use: Stainless Steel & Pewter

Certificate Of Compliance: FERRO Inc. (‘Seller”) Warrants Cermark™ Branded Laser Marking Materials To Be Free From Defects In Materials And Workmanship Under Normal Use, And To Have An Effective Shelf-Life Under Normal Use, For A Period Of Six (6) Months From The Date Of Invoice. The Shelf-Life Will Be Longer As Long As The Product Is Kept Airtight And Liquefied.