I see that the LMM6000 is more expensive, what is the difference between the LMM6000 and the New Ultra? BEHost / Wednesday, March 23, 2022 0 482 Article rating: No rating Question- I see that the LMM6000 is more expensive, what is the difference between the LMM6000 and the New Ultra? I know that the LMM6000 is like the more usual Answer- CerMark ULTRA is a new formula that is produced by Ferro who has acquired the TherMark brand some time ago. TherMark had previously created different formulas for their products. For example we had a formula for stainless steel, another for aluminum, another for copper, another for ceramics, another for glass, etc. Now, Ultra comes to do the things more simple. The quality of the mark is better and you can do your project faster than LMM 6000. The result of the new investigation produces a lower price too! You can continue using the LMM6000 to work with stainless steel and other metals, however, you already have another product that may be more functional, the Ultra can be used on different substrates at the same time. Read more
Can a light plastic bristle brushing with IPA be done to check adherence? BEHost / Wednesday, March 23, 2022 0 336 Article rating: No rating Question- Can a light plastic bristle brushing with IPA be done to check adherence? Answer- One Rule Of Thumb When It Comes To Using The CerMark. The Laser Mark Can Only Be As Durable As The Substrate It Is Applied To. I Can Suggest Testing To Determine The Best Setting. Read more
Where you can find a distributor in Mexico BEHost / Wednesday, March 23, 2022 0 369 Article rating: No rating Question- Where you can find a distributor in Mexico or you can make the purchase directly with you? Answer- We Have A Distributor In Mexico For Some Of Our Products And Some Can Be Purchased Directly, We Also Have A Representative In Costa Rica Read more
My ink/paste has solidified. Can I re-liquify it? BEHost / Wednesday, March 23, 2022 0 354 Article rating: No rating Question- My ink/paste has solidified. Can I re-liquify it? Answer- Yes. You can re-liquify the ink by using small amounts of denatured alcohol or demineralized water. This process may take several hours or even days depending on how much material was in the container. Please remember that the more thinning agent you use, the lighter the pigment may become. Read more
Brown rust color instead of a black mark BEHost / Wednesday, March 23, 2022 0 396 Article rating: No rating Question- am getting a brown rust color instead of a black mark. Are the CerMark laser marking materials bad? Answer- No, the marking materials are fine. The browning or rusting occurs when you have applied too much thermal energy either due to slow speed or excess power. In this case, you have actually burnt the CerMark material. To fix this you should increase the marking speed or lower the laser power. Read more