GCC, a global forefront equipment-manufacturing provider in the visual-tech industry, is pleased to announce the new optional Roll to Roll Autofeeder device, available for GCC LaserPro Spirit & Spirit LS.
The Roll to Roll Autofeeder unit is a superior user-friendly optional item that can be used in tandem with GCC LaserPro Spirit or Spirit LS models to form an automated engraving system when working with rolled material. For instance, if used with Heat transferable material such as PureFlex or SEF heat transfer papers, the laser can produce very exquisite and delicate patterns which can be heat pressed directly without the need for weeding. The Roll to Roll Autofeeder is the essential solution to mass production requirements.
Pass-through Door Switch Module
The Pass-through Door Switch Module is designed to activate the laser when the door is open which conforms the CDRH safety required by FDA.
Aluminum Grid Cutting Table
The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the work piece off the work table from hitting by laser reflection while supports it with reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum funnel exhaust. Rather than handling rigid materials, aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
Rotary Chuck
The rotary chuck is a handy …..for engraving on cups, wine glasses, and even spherical objects with tilt angle. In addition to the standard X, Y, Z axis, the rotary Chuck allows for a fourth axis which rotates the object 360° to allow for engraving on cups, wine glasses, and even spherical objects. The diameter range of the to-be-engraved object is 0.5mm to 120mm and the max. length of the object is 410mm. Its maximum weight should not exceed 4kgs.
*Please note that the Rotary Attachment is not able to work with AAS module at the same time.
External Interface Control Board
The External Control Interface Board is an optional item that allows users to set up GCC laser machines for communication with external devices such as odor reduction units, robot arms and others via a 5V or 12V signal to form an automatic production line. Another useful practice applies in certain working environments when users are required to set up an extra remote interlock control or when laser machines are allowed to be switched off if a security device is triggered.
Multi-purpose Integrated SmartBOX™
The removable drawer design facilitates the cleaning of the SmartBOX™ making it easy for users to remove fallen debris simply by pulling out and sliding the drawer back in place after cleaning. Various set up choices, such as tipped bars/honeycomb table/platform, and easy transformation conveniently accommodates your work requirements.
External Signal Indicator
The indicator will flash to signal the end of job process and is ideal for working environment where audibility is weak.
SmartBOX™
An innovative technology that integrates the ventilation box with a honeycomb table or Aluminum grid cutting table. The result is not only a precise cut with sharp edges, but also a clean laser table to work on.
Rotary Attachment
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum/maximum diameter and length of the working object is 90/180mm and 450mm respectively. Its maximum weight should not exceed 4kgs.
*Please note that the Rotary Attachment is not able to work with AAS module at the same time.
Dust Prevention Window
When the laser system is on duty, it will bring a lot of dust result from the material and it will contaminate the lenses and mirrors. Dust Prevention Window can keep lenses and mirrors clean to promote longer laser life and increase the effect of air induction.
Purex Fume Extraction System
GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line LaserPro laser engraving and cutting systems. These Fume Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Applicable to all GCC LaserPro engravers, the Purex Fume Extraction System represents the latest invention in the exhaust extraction and smoke reduction technology for all types of applications. Noise-free operation, high vacuum capacity, compact design and long life expectancy are just a few of its outstanding features. Powered by a maintenance-free, continuous-running turbine, the Fume Extraction System, which is CE-compliant, ensures personnel safety and legal compliance.
Air Compressor
A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartGUARD™ Fire Alarm (Patented)
Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Honeycomb Table
The honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the work piece off the work table from hitting by laser reflection while supports it with honeycomb cell design. The dust and vapor created during laser cutting are then taken away effectively through the honeycomb cell by down vacuum funnel exhaust. Rather than handling rigid materials, honeycomb table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.
MAlubeGCC10ML Special lubricating greases
Recommended Lubricant for X-axis Rails
on GCC Laser Machine Models: Spirit
SLS, GLS, SGLS-Hyb,S290LS, FMC 270
| Spirit GLS |
|
| Work Area |
34 x 24 in. (860 x 610 mm) Extendable to 38 x 24 in. (960 x 610 mm) |
| Max. Part Size (W xL x H) |
All doors closed |
39x25 x7 in. (990 x 635 x 177 mm) |
| All doors open |
39x ∞ x 7 in. (990 x ∞ x 177 mm) |
| Table Specs |
40.3 x 27.7 in. (1025 x 705 mm), Aluminium |
| Dimensions (W xL x H) |
53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm) |
| Laser Source |
30to 100W 10.6-μm sealed CO2Laser / 20W & 60W 9.3-μm sealed CO2Laser
Powered By Synrad-Made in the USA |
| Cooling |
Air-cooled, Operating environment temperature 15°-30°C (60°-86°F) |
| Drive |
Closed-loop DC Servo Control |
| Maximum Motor Speed |
80 IPS |
| Throughput* |
260.9 in²/ hr (1683 cm²/ hr) |
| Throughput* with SmartACT™ Enabled |
322.1 in²/ hr (2078 cm²/ hr) |
| Speed Control |
Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job) |
| Power Control |
Adjustable from 0~100% (Up to 16 color-linked power settings per job) |
| Distance Accuracy |
0.254 mm or 0.1% of move, whichever is greater |
| Z-Axis Movement |
Automatic |
| Focus lens |
Standard 2.0", optional 1.5", 2.5", & 4.0" available |
| Resolution (DPI) |
Available 125, 250, 300, 380, 500, 600, 760, 1000, 1500 |
| Computer Interface |
Standard printer port and USB 2.0** port |
| Compatible Operating Systems |
MS Windows |
| MCB Controller Memory |
32-MB RAM, Expandable from 64-MB to 32-GB External
|
| Display Panel |
4-line LCD display showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus |
| Safety |
Class I Laser Product Complies with EN60825
Class II Laser Product Complies with CDRH |
| Facility Requirements |
|
| Operation Voltage |
Below 40Watt, 100~240 Volt AC Auto Switching;
40Watt and above, 200~240 Volt AC Auto Switching |
| Power Consumption |
2000W - 4400W |
| Air Exhaust System |
External exhaust system is required, one 4" connection on the back of the machine |
*Throughput value represents the Max. number of 8 in. x 10 in. 500DPI raster jobs that can be done per hour.
** File transmission at USB 2.0 Full Speed rate.
Specifications are subject to change without prior notice.
A Pictaure Conveys a Thousand Words
Glass vs. metal laser tube