X

 

SUPPORT TICKET

 
 


High Speed Laser Engraving on Glass and Plastic
 

Linx CO₂ laser coders are typically used for:

Coding plastic beverage bottles, PET & PVC, Clear glass bottles or marking on card packaging

Linx High Speed Laser Coding on Glass, metals, and Plastic

Production High Speed Laser Coding on Glass and Plastics

Linx lasers marking machines are the perfect solution to marking products such as food, drink and pharmaceutical products. Capible of marking at High Speed in a production line system Linx Lasers can provide a high resolution permanent mark on glass and plastics.  Linx is the perfect system for batch and date coding, logos, scribing barcodes and intricate part marking. Linx laser marking can be used on both statuary or a moving production line.

Linx CO2 and Fiber Laser Marking Machines

Linx offers two types of laser coding machines, based on CO2 and fiber laser technologies.  With flexible any-orientation operation, no need for consumables or routine servicing, all Linx laser coders provide a clean, reliable and cost effective coding solution.  Due to their precise and permanent marking capabilities, our laser coders are ideal for high quality coding requirements such as brand protection or anti-counterfeit marks on perfume & liquor bottles. 

 


Case Studies:



Permanent Marking on Glass With Linx industrial Laser Coder

Machine FinancingLearn moreImage Alt Text
K-1309 CO2 Laser Cutter
K-1309 CO2 Laser Cutter
Seller: ( 0 ) BEHost
Feedback: There are currently no ratings.
10/12/2022
K-1390
770 lbs
$9,800.00

 

How much laser power is best for me?

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness). While 100W CO2 laser is better choice for precise engraving and cutting a little thin material (can cut acrylic up to 3/4" in thickness).
 

Technical Specifications

Working Area
51″ x 35″ (1300 x 900mm)
Can fit uncut sheets or long work pieces (along Y direction) with full pass-through capability.
Max. Workpiece Height
1-1/4″ (30mm)
Working Table*
An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.), and a full-support honeycomb table suitable for soft material processing (paper and textiles).
Laser Source
CO2 Sealed Glass Laser Tube
Laser Power*
100W / 130W / 150W
Laser Configuration
Single laser
Focus Lens*
Standard 2.5″ (63.5mm), optional 4″ (101.6mm), or 2″ (50.8mm, can be equipped with a special laser pen).
Software
EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. 100% support LightBurn software.
Machine/PC Connection
USB / FLASH / LAN
Operating Mode
Cutting / Engraving / Combined
Control Interface
True Color TFT LCD panel with function buttons.
Memory Capacity
Multiple job storage up to 128M.
Resolution
Up to 4064 DPI.
Motion System
Transmission with belt on advanced balanced bearing rails.
Driven by stepper motors.
Accessories
Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement*
220V/50Hz, single phase, up to 2.5kW~3kW depends on configurations.
Size
75″ x 67″ x 43″ (1900 x 1700 x 1100mm)
Net Weight
770lb (350Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
 
Engrave
Cut
Acrylic
Paper
Wood
Textiles
Leather
Laminates
Rubber
Stone
Glass
Coated Metals

Production Line Printing

K-1309 CO2 Laser Cutter
K-1309 CO2 Laser Cutter
10/12/2022
K-1390
770 lbs
$9,800.00

 

How much laser power is best for me?

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness). While 100W CO2 laser is better choice for precise engraving and cutting a little thin material (can cut acrylic up to 3/4" in thickness).
 

Technical Specifications

Working Area
51″ x 35″ (1300 x 900mm)
Can fit uncut sheets or long work pieces (along Y direction) with full pass-through capability.
Max. Workpiece Height
1-1/4″ (30mm)
Working Table*
An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.), and a full-support honeycomb table suitable for soft material processing (paper and textiles).
Laser Source
CO2 Sealed Glass Laser Tube
Laser Power*
100W / 130W / 150W
Laser Configuration
Single laser
Focus Lens*
Standard 2.5″ (63.5mm), optional 4″ (101.6mm), or 2″ (50.8mm, can be equipped with a special laser pen).
Software
EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. 100% support LightBurn software.
Machine/PC Connection
USB / FLASH / LAN
Operating Mode
Cutting / Engraving / Combined
Control Interface
True Color TFT LCD panel with function buttons.
Memory Capacity
Multiple job storage up to 128M.
Resolution
Up to 4064 DPI.
Motion System
Transmission with belt on advanced balanced bearing rails.
Driven by stepper motors.
Accessories
Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement*
220V/50Hz, single phase, up to 2.5kW~3kW depends on configurations.
Size
75″ x 67″ x 43″ (1900 x 1700 x 1100mm)
Net Weight
770lb (350Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
 
Engrave
Cut
Acrylic
Paper
Wood
Textiles
Leather
Laminates
Rubber
Stone
Glass
Coated Metals
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review