X


High Speed Laser Engraving on Glass and Plastic
 

Linx CO₂ laser coders are typically used for:

Coding plastic beverage bottles, PET & PVC, Clear glass bottles or marking on card packaging

Linx High Speed Laser Coding on Glass, metals, and Plastic

Production High Speed Laser Coding on Glass and Plastics

Linx lasers marking machines are the perfect solution to marking products such as food, drink and pharmaceutical products. Capible of marking at High Speed in a production line system Linx Lasers can provide a high resolution permanent mark on glass and plastics.  Linx is the perfect system for batch and date coding, logos, scribing barcodes and intricate part marking. Linx laser marking can be used on both statuary or a moving production line.

Linx CO2 and Fiber Laser Marking Machines

Linx offers two types of laser coding machines, based on CO2 and fiber laser technologies.  With flexible any-orientation operation, no need for consumables or routine servicing, all Linx laser coders provide a clean, reliable and cost effective coding solution.  Due to their precise and permanent marking capabilities, our laser coders are ideal for high quality coding requirements such as brand protection or anti-counterfeit marks on perfume & liquor bottles. 

 


Case Studies:



Permanent Marking on Glass With Linx industrial Laser Coder

Machine FinancingLearn moreImage Alt Text
BF-1610 CO2 Laser Cutting Laser
BF-1610 CO2 Laser Cutting Laser
Product Advantage Motors Laser Optics Laser Accessories Intro Intro IM
Seller: ( 0 ) BEHost
Feedback: There are currently no ratings.
63" x 39"
Dual130W &150W; 130W; 150W
10/12/2022
BF-1610
9.2
950 lbs
$15,600.00
 The BF-1610 CO2 laser cutting machine,  fixed working table, offers an economical solution for 60″ (1500mm) sheet material cutting and engraving of acrylics, cardboard, wood, textiles, two-color sign laminate, stone, and much more. Our laser machines are the most robust, accurate, and reliable on the market.

Which laser configuration is best for me?

You should choose single laser configuration if your primary needs is processing work pieces larger than half of the working table.

Dual laser systems include two laser heads, allowing you to cut or engrave twice as much material in the same amount of time. Each laser has an independent set of laser source, optics and power supply which you can enable or disable according to processing needs. The spacing between the heads can be adjusted at any time using just a screwdriver.

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness).
 

 

 

 

What about motor options?

With servo motors from world’s leading supplier, the laser head of the BF-1610 can move very fast at extremely high resolution. A step size of just 6.25μm gives the machine a resolution of over 4000DPI. In arbitrary-direction cutting, the head can accelerate at 2 m/s2 (0.2G). The BF-1610 with high quality stepper motors sacrifices only a small amount of performance.
 
 
 

 

100% Compatible with LightBurn Software

 

 

 

 

 

 

 

 

 

 

Print Driver

 

 

 

 

 

 

 

 

 

Multiple Laser Cutting/Engraving Heads*

 

 

 

 

 

 

 

 

 

A Complete Set of Accessories

 

 

 

 

 

 

 

 

 

 

Robust, High-Precision Slides

 

 

 

 

 

 

 

 

 

 

Superior Mirrors and Mirror Mounts

 

 

 

 

 

 

Note: All features marked with * depend on configurations of the laser machine.

 

 

Technical Specifications

Working Area
63″ x 39″ (1600 x 1000mm)
Can fit uncut sheets or long work pieces (along Y direction) with full pass-through capability.
Max. Workpiece Height
1-1/4″ (30mm)
Working Table*
An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.), and a full-support honeycomb table suitable for soft material processing (paper and textiles).
Laser Source
CO2 Sealed Glass Laser Tube
Laser Power*
130W / 150W
Laser Configuration*
Single / Dual laser(s)
Focus Lens*
Standard 2.5″ (63.5mm), optional 4″ (101.6mm).
Software
EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. 100% support LightBurn software.
Machine/PC Connection
USB / FLASH / LAN
Operating Mode
Cutting / Engraving / Combined
Control Interface
True Color TFT LCD panel with function buttons.
Memory Capacity
Multiple job storage up to 128M.
Resolution
Up to 4064 DPI.
Motion System*
Transmission with belt on advanced balanced bearing rails.
Driven by stepper / servo motors.
Accessories
Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement*
220V/50Hz, single phase, up to 2.5kW~4.5kW depends on configurations.
Size
88″ x 69″ x 44″ (2235 x 1750 x 1120mm)
Net Weight
950lb (430Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
 
Engrave
Cut
Acrylic
Paper
Wood
Textiles
Leather
Laminates
Rubber
Stone
Glass
Coated Metals

Production Line Printing

BF-1610 CO2 Laser Cutting Laser
BF-1610 CO2 Laser Cutting Laser
Product Advantage Motors Laser Optics Laser Accessories Intro Intro IM
63" x 39"
Dual130W &150W; 130W; 150W
10/12/2022
BF-1610
9.2
950 lbs
$15,600.00
 The BF-1610 CO2 laser cutting machine,  fixed working table, offers an economical solution for 60″ (1500mm) sheet material cutting and engraving of acrylics, cardboard, wood, textiles, two-color sign laminate, stone, and much more. Our laser machines are the most robust, accurate, and reliable on the market.

Which laser configuration is best for me?

You should choose single laser configuration if your primary needs is processing work pieces larger than half of the working table.

Dual laser systems include two laser heads, allowing you to cut or engrave twice as much material in the same amount of time. Each laser has an independent set of laser source, optics and power supply which you can enable or disable according to processing needs. The spacing between the heads can be adjusted at any time using just a screwdriver.

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness).
 

 

 

 

What about motor options?

With servo motors from world’s leading supplier, the laser head of the BF-1610 can move very fast at extremely high resolution. A step size of just 6.25μm gives the machine a resolution of over 4000DPI. In arbitrary-direction cutting, the head can accelerate at 2 m/s2 (0.2G). The BF-1610 with high quality stepper motors sacrifices only a small amount of performance.
 
 
 

 

100% Compatible with LightBurn Software

 

 

 

 

 

 

 

 

 

 

Print Driver

 

 

 

 

 

 

 

 

 

Multiple Laser Cutting/Engraving Heads*

 

 

 

 

 

 

 

 

 

A Complete Set of Accessories

 

 

 

 

 

 

 

 

 

 

Robust, High-Precision Slides

 

 

 

 

 

 

 

 

 

 

Superior Mirrors and Mirror Mounts

 

 

 

 

 

 

Note: All features marked with * depend on configurations of the laser machine.

 

 

Technical Specifications

Working Area
63″ x 39″ (1600 x 1000mm)
Can fit uncut sheets or long work pieces (along Y direction) with full pass-through capability.
Max. Workpiece Height
1-1/4″ (30mm)
Working Table*
An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.), and a full-support honeycomb table suitable for soft material processing (paper and textiles).
Laser Source
CO2 Sealed Glass Laser Tube
Laser Power*
130W / 150W
Laser Configuration*
Single / Dual laser(s)
Focus Lens*
Standard 2.5″ (63.5mm), optional 4″ (101.6mm).
Software
EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. 100% support LightBurn software.
Machine/PC Connection
USB / FLASH / LAN
Operating Mode
Cutting / Engraving / Combined
Control Interface
True Color TFT LCD panel with function buttons.
Memory Capacity
Multiple job storage up to 128M.
Resolution
Up to 4064 DPI.
Motion System*
Transmission with belt on advanced balanced bearing rails.
Driven by stepper / servo motors.
Accessories
Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement*
220V/50Hz, single phase, up to 2.5kW~4.5kW depends on configurations.
Size
88″ x 69″ x 44″ (2235 x 1750 x 1120mm)
Net Weight
950lb (430Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
 
Engrave
Cut
Acrylic
Paper
Wood
Textiles
Leather
Laminates
Rubber
Stone
Glass
Coated Metals
Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review