High Speed Laser Engraving on Glass and Plastic
 

Carriage Assembly without PCB for GCC Expert 24

Carriage Assembly without PCB(EX-24 LX) for GCC Expert 24

For GCC Laser Models Mercury I, II, III (5206e / 5272 v1, v2 MB)  (Before 29001191G)

* Includes Top DU Rollers and Bottom Wheels
** DOES NOT include optics

For: GCC Models Spirit SLS\S290LS (Before Serial #: I50790)

For Models Spirit Si & SGE Before Serial #: I50790

For Models Spirit Si & SGE After Serial #: I50790

Carriage, Lens Carriage Assembly w/o Lens and Mirror (Before SN: I50790), Spirit GX

CerMark LMC6044P
Premium Black, 1000grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

Recommended substrates:

LMC6044P material can mark a range of glass and ceramic substrates. It has previously been used to mark many different types of glass in industrial applications such as vehicle windshields, laboratory instruments, plate glass, and glass ampoules. It can also be used for decorative work on bottles, wine glasses and awards. Additionally, it has found uses on ceramic products such as porcelain sanitary ware, electronic substrates, and for decorating wall and floor tiles.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application.

SDS CerMark LMC6044P

 LMC6044P coverage

Mirror 4, 0.75" Dia. For S290LS Spirit Fiber
For Machines Serial # PXXXXX or After
HTS#: 8466.93.9585

Carriage, Lens Carriage Assembly w/o Lens and Mirror (Before SN: I50790), Spirit GX

Pointer, Red Pointer Diode Assembly, X252/X380/MG380 (for 5206e/5272v1/5272v2)
HTS#: 8456.11.0000

For GCC LaserPro X-Series Models X380, X252, MG-X380HYB

MCB, GCC Main Motherboard Type 5206E (Mercury III, New Mercury)

Tube, Laser Tube, 80w Glass Tube R-Type for GCC Laser Model: X252 
* w/1-Year Parts Limited Warranty  (Up to 50% Power)

Motor, X-axis (GCC Vinyl Cutter Puma II & III (132cm\52" Model)

* 3-Months Manufacturer's Warranty

(BK01359C, Hansen Motor 116-33224-)

Roller, Assist Roller Assembly for GCC Expert 24

Rear platen assembly (For service) for GCC Expert 24

Front platen assembly (For service) for GCC Expert 24

290068060G Panel, Control Panel Assembly for Jaguar II and IV (Without Watchdog) / The Watchdog is usually located on the side of the machine, where the white ribbon cable connects, the control panel and motor run through it.

29005256G - Watch Dog-Interface Converter Board Assembly, Jaguar II/III/IV (no watch dog for J5 series)

Control Panel, LCD Assy PCB for 5206e MCB (Spirits-All-Older, S290, C180-II, MIII, X252\X380\X500-II, Gaia)

Control Panel, LCD Assy PCB for 5206e MCB (C180-I)

LGCC-290069150G Lens, Dust Prevention Window Assembly

(Rectangular, 2nd Mirror Mount, C180-I, C180-II, Previous # 29005134G)

Mirror, #3 w/Holder for: X-500 Series 80w/100w Laser (After Serial #: M50355)

Lens Carriage Module(mirror 3 + holder) for80w/100w 

Mirror 4, 1" Dia. for: X380/X252/MG380Hybrid/Mercury SN before U90xxx/T90xxx, Venus II SN before T56191
Replaces LGCC-29001107
Base DIM's: 1.26"W x 1.35"H (32 x 34mm)

GCC 290069540G Lens, Collimating, Dust Prevention Window

Machine model: X380 / X500 - II & III

Lens 2" FD-Blue, Std For Models: Mercury-ALL\Venus-II\X252\X380\MG380-HYB Spot Size: .005"

For Machine from Serial #: Mercury-ME-25/ME-40V SN before T90xxx, ME-12/ME-30V/ME-40Vi/ME-60Ti SN before U90xxx, X252, X380, MG380Hybrid SN before U90xxx, Venus II SN before T56191

PCB, High Voltage Control Board Set for CDGRI & Reci for X252-80w \ X380-100w \ X500-100w+
(Replaces PCB # 29006036G)

290070600G - 2 in 1 Cutter mainboard with Puma II (PLUS) firmware