High Speed Laser Engraving on Glass and Plastic
 

Premium Black, 250grams
Use: Marking Material for Glass and Ceramics

NOTE: By the conclusion of 2024, the LMC-6044P Paste will be substituted with the ULTRA Paste. The ULTRA Paste is specifically designed for marking on ceramic substrates and has been utilized for laser marking ceramics for the past three years with excellent results.

LMC6044P is recommended for creating black marks on glass and ceramic substrates. It makes darker black marks on these substrates than the older LMC12. LMC6044P dries quickly as a dark grey powder-like coat and is easy to wash after marking. The coat can be smudged or wiped off prior to laser marking, however, so LMC6044P should be marked shortly after application. 

SDS CerMark LMC6044P

Weight: 1000grams
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals
HTS Code: 320710000000

LMM14 is one of TherMark’s two general-purpose laser marking inks and is recommended for creating a black mark on most metals. The combination of its flexible process window and wide range of applicable substrates makes LMM14 an extremely easy product to use. In general, if you are looking for one laser marking product to keep on your shelf, we recommend LMM14.

LMM14 dries quickly as a light-gray powder coat and is extremely easy to wash after laser marking. This coat should not be extensively handled prior to laser marking, however, so LMM14 should be marked shortly after application.

 SDS For Cermark LMM14 Paste

 LMM14  coverage

Weight: 250grams-.55Lbs
Use: Stainless Steel, Aluminum, Brass & Other Hard Metals, ~5000SQ" Coverage
HTS Code: 320710000000

 SDS For Cermark LMM14 Paste

 LMM14  coverage

LMM6000- 1000grams is on backorder until Nov. 18th 2022

Weight: 1000grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. LMM6000 has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with LMM6000 to be stored, moved, or stacked prior to laser marking. 

SDS For Cermark LMM6000

 LMM-6000 coverage

Weight: 250grams
Use: Stainless Steel  & Pewter

LMM6000, a CerMark™ product, is one of TherMark’s two general-purpose laser marking inks and is recommended for creating black marks on a variety of metals. It has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with the product to be stored, moved or stacked prior to laser marking.

SDS For Cermark LMM6000

SDS (Spanish Doc). For Cermark LMM6000  

 LMM-6000 coverage

LMM6012- 1000 grams (low stock, Disc.)

Weight: 1000grams
Use: Screen print application 

The CerMark LMM6012 is a laser marking paste specially formulated for metals, creating durable marks on materials like stainless steel and aluminum. Applied in a thin layer, it bonds when heated by a CO₂ or fiber laser, leaving a dark, long-lasting mark resistant to wear, abrasion, and chemicals. Ideal for product customization and industrial uses, it can be applied by screen printing or directly without spraying.

For screen printing, LMM6012 offers up to 2.5–3 times more coverage than spraying, yielding consistent thickness and precise control over marking areas. This ready-to-use formula requires no dilution, though heated drying (200–400°F) is recommended for optimal results. Coverage estimates include up to 34,000 sq. inches per 1,000 grams of ink.

Estimated Coverage:
50 gram liquid ink, up to 1,700 sq./in

250 gram liquid ink, up to 8,500 sq./in

1,000 gram liquid ink, up to 34,000 sq./in

 LMM-6000 coverage

Tape Notes: Black Marking, for Metal, 2"x 6"  Sheet  2.0 oz
Export Notes: HTS#: 3824.99.9297

LMM6018 instructions Download

Cermark Tape SDS Document

290070600G - 2 in 1 Cutter mainboard with Puma II (PLUS) firmware 

Rail, X-axis Linear Guide with Bearing Block ONLY (Spirit SGLS)

Rail, X-axis Linear Guide (Spirit LS/S290 LS)

Flat Cable Assembly.(104CM) for GCC Expert 24

GCC 290071580G Cut-off Blade Assembly (5pcs) for RX

Rotary Attachment for GCC LaserPro Spirit GLS\GLS-HYB\X380R\MG380X

WORKPIECE LIMITATIONS:

Max. Length: 650mm(25.59inches)
Max. Loading Weight: 7 kg (15 lbs.) 
Min. Diameter: 90 mm (3.54 inches)
Max. Diameter 180 mm (7.09 inches)
Max. Loading 4Kg

Machine Model: GCC Jaguar Series (Jaguar II, III,IV,V)

For GCC LaserPro X500 Series

Pulley, X-axis (Right-Sprockets\Active), Mercury III, X252

Roller, Small-Black for X500-II, III

Roller Holder with Damper, Jaguar 101/ RX-101 (Lenght TIP-to-TIP 50.5" / 128.3cm)

Motor, X-axis w/Bracket Assy. (C180-II, See 29005410G) High Torque, Pulley, Bracket & Belt w with 3-Months Manufacturer's Warranty

GCC 290076240G Rail, X-axis Assembly with Motor, Mirror #4, Sensors for C180-II

Mirror 1, #2 or #3, 1.0" Diam. 
For: X252/X380- Mirror 1,2,3
MG380HYB- MIrror 1,2,3,4
X500-II / III 80w/100w- Mirror 1,2
Gaia II- Mirror 2 & 4
Previous part #'s\Replaces: 29004328G , 29006373G

PCB Board, Compressor Control Board Assembly (SSR), Mercury III/ X380/C180II/S400

Mirror, #1, 1" Diam. For C02 Laser Models

For: Spirit SLS,GLS, SGLSHYBR-Co2, S400-Co2,  Mercury III (for after SN M50659)  " (The 1st mirror)"

New Replacement for LGCC-29003695G (Discontinued Rectangular Mirror)

HSC#: 8466.93.9585

290077800G -DC Motor Driver Board Assembly with L6203, for Puma IV

Network connection enables multiple units to be operated by one PC and multiple PCs to share a single unit. With the Ethernet adapter, GCC cutting plotters, GCC LaserPro engraving and cutting systems are made easier to use through network connection.

Mirror, #3 w/Holder for: X-500-II\III for 80w/100w Before SN: S98397

GCC 290078370G Pen, Ball Point Pen Core. (30pcs per package, 2.95mm diameter of ballpoint pen)

All cutter, need to order 29005951G Ball point Pen holder