High Speed Laser Engraving on Glass and Plastic
 

Blower Notes: 300603 / 230V / 120V  (300201)

The 1500i 120VAC and 1500i 230VAC use the same motor. It is a 230 VAC motor, and inside of the 1500i 120 VAC unit there is a transformer that supplies the internals to that machine with 230 VAC power even though it is powered on 120vac.

Machine Model: 1500i / UPX1500

Export Notes:  HTS Code#: 8414.10.0000, Made in the UK-England

(Request a quote, special item. ETD: 3-4 Weeks)

Machine Model: Captivair Mini
Blower Notes: 300586 / 230V
Export Notes: HTS Code#: 8414.10.0000, Made in the UK-England

Ask for A quote

GCC-290117240G Board, 5272v3 Main Board in Common Assembly with 5272v3 firmware for E200

GCC-290117070G Board, Power On/Off Control Board Assembly for E200 

Machine Model : Alpha's 0AL2101 /  0AL4101 & 0AL4101EP

Export Notes:* FOB Point is Purex-UKHTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:   Equipment SN:   Hose Kit Type\Part#:   

Machine Model: Alpha / Xbase / New FumeCube/ FumeCube Max + Potentiometer (before 400048)

Export Notes: HTS Code#: 9537103000, Made in the UK-England
DIM's: 3Lbs 1.4kg. 6"x6"x7" (1.4kg, 16x16x18cm)

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:   Equipment Serial #:  Hose Kit Type\Part #:

Notes: 2 Including PSU 230-115v FC
Machine Model: Alpha,FumeCubes
Export Notes: HTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model   Equipment SN:  Hose Kit Type / Part #:

DISCONTINUED analogue PCB   (800 PCB Series / Fume Buster )

Export Notes  HTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:  Equipment SN:   Hose Kit Type\Part #:

GCC-245000990G Power Supply 150W 40V/3.8A (HRP-150-40GC) Model E200

Power Supply, Laser Tube PS RSP-2400-48 2400W 48V/50A ( for Ti100, SN after K51416) , S400 80GT-120GT

Power Supply, Laser Tube PS X252 80w Co2 Glass Tube (HY-DY10 High Voltage)

Power Supply, Laser Tube PS (Rici Tube 130w-150w, Positive High Voltage DY-20, X500RX)

* Previous part #: LGCC-245000940G

Power Supply, HY-DY13 High Voltage Power Supply (for 100W CO2 Glass tube, X380RX, X500RX)

Relay, Solid State Relay for X-series, X380, X280

Screw, For Retainer, X-axis Belt Retainer Screw to Rail, 90° dish flat head machine screw M3*8L

* Image shows Retainer and two (2) screws that are needed. This is part is ONLY for screws and sold individual.

Screw, Rotary Attachment Base Plate Set Screw (M6*16, each)

Screw, Seat-Auto Focus Screws (Qty 2, M2*3L)

Switch, Limit Lever, Z Axis Down, All LaserPro Machines (SW00010A)

For: Spirit\Mercury\Venus II\X252\X380\MG380HYB

For Models: Mercury/Explorer/Venus/Spirit Si\SGE\SGX\SLS\SGLS\C180)

Magnet, Door Interlock Magnets with cable, No Connectors ea. (For All Lasers)

For: Cutters/Laser excluding AR 24 & iCRAFT

Switch, Laser On\Off Rotating Safety Key Switch (All GCC Machines)

Switch, Emergency Switch (ALL GCC Models)

26100003 GCC- Voltage Regulatory  for Lynx 30 60 and Puma I 30-60- Puma II 30)

Sticker, GCCLaserPro Logo 4"x12.5" (Front of Laser Door, Rev. 2)

Sticker, GCC LaserProi.com Logo (17"x4", Front of Laser Door, Rev. 1)

Sticker, GCC Logo Only, Small, Label (0.6"H x 2.2" L)