High Speed Laser Engraving on Glass and Plastic
 

Bracket, Mirror Prism Mounts Assy For: C180/X252/SI/GLS/SGE/SGX/SLS/X380/S290/Explorer (for ALL the optics, Mirror 1, 2, 3), Mercury 30/40-mirror 1 & all Mercury-red beam mirror
Replaces: 20200185G

Brass, Black Laserable Brass Gloss 12" X 24" .016" (Black Front\Gold Background)

Laserable Brass is recommended for laser engraving, although diamond drag or burnishing will also work. Lettering will be gold.

Recommended laser settings: Speed ~ 100 Power ~ 60 (35 watt laser)

Engraveable? Yes
Sublimatable? NO
Laserable? YES
For Outdoor Use? NO

• Thickness 0.016" Inches
• Size 12"x20" Inches
• No Adhesive Backed

Filter, Air Compressor Vapor Filter, Explorer/Spirit

Pulley, X-axis Tension Idle Pulley Assy. For: Explorer\Spirit GX (Left Side)

PCB, Auto Focus PCB, For Braided Cable, PC00154A, Rev. 2 ( X380\X252\Mercury I & II/Venus/Explorer\C180-I)

Pulley, X-axis (Right-Sprockets\Active), Venus

Mirror, #1, 1.0" Diam. (Explorer II-DEOS Tube)

29000864  GCC -Mainboard for Lynx 60/30 and Puma I

29000866G-Pen Force PCB Assembly for Lynx and Puma I

29000869 GCC-Carriage PCB  for Lynx 60 -132  and Puma I -60

29000871G - Control panel PCB Assembly for Puma I & II

Sensor, PCB, Rotary Attachment Sensor PCB

Flange, Roll Holder Flange, for All Cutter Models (set of 2)

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

GCC-29001101G Lens, 1.5" FD-Purple, Spot Size: .003",

Machine Models: Mercury I, II, III \ Venus, MG380-HYB \ X380 \ X252

Lens, 2.5" FD-Gold, Mercury\\Venus, Spot Size: .007" For: Mercury-ME-25/ME-40V SN before T90xxx, ME-12/ME-30V/ME-40Vi/ME-60Ti SN before U90xxx, X252, X380, MG380Hybrid SN before U90xxx, Venus II SN before T56191

GCC 29001104G Lens, 4.0" FD-Red , Spot Size ~.012"

Machine Model: Mercury (ME-12/ME-40Vi/ME-60Ti SN before U90xxx, ME-25/ME-40V SN before T90xxx), Venus II SN before T56191

* Best use for cutting and rotary attachmenet

Roller, Small Black Roller, Pack of 2 Set (Mercury/Venus/X252,X380, J/L & Vision LaserPro, BK01321) Bottom X-axis or Side Y-Axis

Pin, Auto Focus Pin Assembly, 6" Cable For Explorer,  Mercury,X252, Venus II SN before T56191 (BK01325E)

Roller, DU Roller Assembly-Top X-axis Pkg 2 (Mercury, Venus, X252, X380, MG380-Hyb, X500- BK01330, 14-pcs)

Mirror #1, 0.75" Dia. for Mercury/Venus/Spirit/J and Explorer 1 (Rev. 1)