High Speed Laser Engraving on Glass and Plastic
 

Blower Notes: 300603 / 230V / 120V  (300201)

The 1500i 120VAC and 1500i 230VAC use the same motor. It is a 230 VAC motor, and inside of the 1500i 120 VAC unit there is a transformer that supplies the internals to that machine with 230 VAC power even though it is powered on 120vac.

Machine Model: 1500i / UPX1500

Export Notes:  HTS Code#: 8414.10.0000, Made in the UK-England

(Request a quote, special item. ETD: 3-4 Weeks)

Machine Model: Captivair Mini
Blower Notes: 300586 / 230V
Export Notes: HTS Code#: 8414.10.0000, Made in the UK-England

Ask for A quote

GCC-290117240G Board, 5272v3 Main Board in Common Assembly with 5272v3 firmware for E200

GCC-290117070G Board, Power On/Off Control Board Assembly for E200 

Machine Model : Alpha's 0AL2101 /  0AL4101 & 0AL4101EP

Export Notes:* FOB Point is Purex-UKHTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:   Equipment SN:   Hose Kit Type\Part#:   

Machine Model: Alpha / Xbase / New FumeCube/ FumeCube Max + Potentiometer (before 400048)

Export Notes: HTS Code#: 9537103000, Made in the UK-England
DIM's: 3Lbs 1.4kg. 6"x6"x7" (1.4kg, 16x16x18cm)

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:   Equipment Serial #:  Hose Kit Type\Part #:

Notes: 2 Including PSU 230-115v FC
Machine Model: Alpha,FumeCubes
Export Notes: HTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model   Equipment SN:  Hose Kit Type / Part #:

DISCONTINUED analogue PCB   (800 PCB Series / Fume Buster )

Export Notes  HTS Code#: 9537103000, Made in the UK-England
 

* In order to Configure this PCB we require the following information from your Purex Machine, Equipment Model:  Equipment SN:   Hose Kit Type\Part #:

GCC-245000990G Power Supply 150W 40V/3.8A (HRP-150-40GC) Model E200

Power Supply, Laser Tube PS RSP-2400-48 2400W 48V/50A ( for Ti100, SN after K51416) , S400 80GT-120GT

Power Supply, Laser Tube PS X252 80w Co2 Glass Tube (HY-DY10 High Voltage)

Power Supply, Laser Tube PS (Rici Tube 130w-150w, Positive High Voltage DY-20, X500RX)

* Previous part #: LGCC-245000940G

Power Supply, HY-DY13 High Voltage Power Supply (for 100W CO2 Glass tube, X380RX, X500RX)

Relay, Solid State Relay for X-series, X380, X280

Screw, For Retainer, X-axis Belt Retainer Screw to Rail, 90° dish flat head machine screw M3*8L

* Image shows Retainer and two (2) screws that are needed. This is part is ONLY for screws and sold individual.

Screw, Rotary Attachment Base Plate Set Screw (M6*16, each)

Screw, Seat-Auto Focus Screws (Qty 2, M2*3L)

Switch, Limit Lever, Z Axis Down, All LaserPro Machines (SW00010A)

For: Spirit\Mercury\Venus II\X252\X380\MG380HYB

For Models: Mercury/Explorer/Venus/Spirit Si\SGE\SGX\SLS\SGLS\C180)

Magnet, Door Interlock Magnets with cable, No Connectors ea. (For All Lasers)

For: Cutters/Laser excluding AR 24 & iCRAFT

Switch, Laser On\Off Rotating Safety Key Switch (All GCC Machines)

Switch, Emergency Switch (ALL GCC Models)

26100003 GCC- Voltage Regulatory  for Lynx 30 60 and Puma I 30-60- Puma II 30)

Sticker, GCCLaserPro Logo 4"x12.5" (Front of Laser Door, Rev. 2)

Sticker, GCC Logo Only, Small, Label (0.6"H x 2.2" L)

GCC 26500059G Blade, 60 DEGREE, for standar sandblast GCB-460SO

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series  

GCC Video:  Use of cutting blades (By Color)