High Speed Laser Engraving on Glass and Plastic
 

Blade, 60 DEGREE, Blue Cap Blade / 0.25 mm blade offset / 2.5 mm diameter (1pc)

For cutting thin sandblast mask and stencil with friction feed or sprocket feed machine 

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265017540G Blade, 60 DEGREE, Green Blade 2.5mm diameter  (1pc)

Model: i-Craft / AR-24 / EXII / Puma IV / Jaguar V / RXII

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 1 Pcs, 25 Deg., 2.5mm Diam., Yellow Cap, Std Force for Black Plate Holder

App\Models: Cutting Thin Materials or Window Ting \ AR-24/ i-Craft/EXII/Jaguar V/Puma IV

GCC Video:  Use of cutting blades (By Color)

GCC 265012020G Blade, 60 DEGREE, Green-cap Blade 2.0mm diameter  for cutting thick material, Flock 8.5mm  thick (1 pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert Series

GCC Video:  Use of cutting blades (By Color)

GCC 26500060G Blade, 50 DEGREE, GCB-500, For Cutting Small Letters( 1pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series

GCC Video:  Use of cutting blades (By Color)

GCC 26500059G Blade, 60 DEGREE, for standar sandblast GCB-460SO

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series  

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 5 Pack, 25 Deg., 2.0mm Dia., Yellow Cap, Std Force for Gold Plate Holder
App\Models: Cutting Thin Materials or Window Ting,  \ RX/Jaguar IV/Puma III/Expert series

GCC Video:  Use of cutting blades (By Color)

Blades, GCC, 5 Pack, 45 Deg., 2.0mm Diam., Red Cap, Std Force for Gold Plate Holder

App\Model: For Cutting Vinyl & Thin Flock \ RX/Bengal/Sable/Jaguar IV/Puma 1-3/Expert Series

GCC Video:  Use of cutting blades (By Color)

GCC 202003480G Blade, 45 DEGREE, Red cap For Cutting Vinyl & Thin Flock 

For cutting thick fluorescent and window tint film. Also for cutting detailed work in standard vinil

5-Unit package /  0.25 mm blade offset / 2.5mm blade diameter

Models: i-Craft 2.0/ AR-24/ Expert II /Puma IV

GCC Video:  Use of cutting blades (By Color)

Blades, Roland, 1 Pcs, 45 Dg.\.25 Offset Blade For All Purpose (Roland CAMM-1-All cutters)

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. The Roland part number USA-C145-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

GCC-216000980G Raspberry Pi 3 Module B+

Model: E200

Bearing, R-Bearing, 6801ZZCMP5NS7L For Roland EGX-360, MDX-40

Nose Cone Adapter, (M) Standard EGX-20

This Standard Adapter Nose (Product #21905162) is used in the EGX-20. The nose protects materials from scratching when using the Auto-V function. This nose is designed to accommodate smaller sized tools.

Wrench, EGX-350 Spanner Wrench Tool (2 sided)

* This Tool Spanner (Product #21935111) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-350 and EGX-400/600 engravers.

Wrench, Tool Spanner 6-14 CS-20/EGX-30/EGX30a/EGX20

* This Tool Spanner (Product #21935115) is used to install and tighten collets within the spindle. This spanner is intended for use with the EGX-20 engraver.

Wire, X-Axis CS-20 EGX30 (ea, 1 on Machine)

Wire, Y-Axis CS-20, EGX30 (ea., 2 on Machine)

Right & Left Side, 74"/188cm

Magnet, No Wires, Door Mount ea.

Cover Clear Plastic , Front Cover EGX-300

Plate, T-Slot 1 Roland EGX400, 1-Left Side

Plate, T-Slot 2 Roland EGX400, 1-Center-Single

Plate, T-Slot 3 Roland EGX400, 1-Right Side