Machine Model: Vacuum Control (Digital Series)
Export Notes: HTS Code#: 9537103000, Made in the UK-England
* For any PCB boards, we need to know what machine to program them. Please let us  know. 
 Equipment SN:  Hose Kit Type / Part#:

Machine Model:  Volume Control (Digital Series Laserex Previous #: 400001 or Digital PCB 400002)
Export Notes: HTS Code#: 9537103000, Made in the UK-England

* Requires Machine Model, Serial # and Voltage for configuration before shipment.

** Volume control board, the motor adjusts according to how much airflow is moving through the system.

GCC-290119370G Board, Raspberry Disk Board Assembly with Raspberry OS for E200

Board, Spindle Board Assy, EGX400/600
(Schematic Part # 20)

GCC-290117250G Board, Touch Panel Board With E200 Touch Screen Firmware 

E200 Model

Board, XY Board Assy, EGX400/600

Board, XZ Board Ass’y, EGX400/600 (W589356070)

Bracket Base, Mirror #2, Spirit Models

Lock, Front Door Latch Lock, Black-Round (Spirit\Mercury\X-series)

Hinge, Window Lid Hinge for ALL GCC LaserPro Machines

Paper, Lens Cleaning Tissue Paper For Laser Optics Cleaning (FKA Kodak Lens Tissue, 50 pck, GCC# 26500192)

Swabs, Cotton Tip Applicators, 6" For Laser Optics (100/pck, GCC# 26500193)

Connector, Pipe, Air Assist Hose, M-5HLH-6 (Mercury, X-Series, Venus)

GCC 265012020G Blade, 60 DEGREE, Green-cap Blade 2.0mm diameter  for cutting thick material, Flock 8.5mm  thick (1 pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert Series

GCC Video:  Use of cutting blades (By Color)

265016770G GCC-Pad

(W 6mm* L 10m) Black

Blades, GCC, 1 Pcs, 25 Deg., 2.5mm Diam., Yellow Cap, Std Force for Black Plate Holder

App\Models: Cutting Thin Materials or Window Ting \ AR-24/ i-Craft/EXII/Jaguar V/Puma IV

GCC Video:  Use of cutting blades (By Color)

GCC 265017540G Blade, 60 DEGREE, Green Blade 2.5mm diameter  (1pc)

Model: i-Craft / AR-24 / EXII / Puma IV / Jaguar V / RXII

GCC Video:  Use of cutting blades (By Color)

Blade, 60 DEGREE, Blue Cap Blade / 0.25 mm blade offset / 2.5 mm diameter (1pc)

For cutting thin sandblast mask and stencil with friction feed or sprocket feed machine 

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265017560G Blade, 50 DEGREE/ 0.175mm blade offset/ 2.5mm diameter (1pc) Black Cap Blade.

For cutting small text and fine detail. Sharp blade with smallest offset

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265019700G Blade, 45 DEGREE, Red Blade 2.5mm diameter 1pc/pk (w/package), for RXII & J5 series  (This blade is for black blade holder 2.5 it will not work for the gold holder)

GCC Video:  Use of cutting blades (By Color)

Magnet, Switch Assembly, for All Lasers. It is made up of: (1) LGCC-22000045G + (1) LGCC-25700015G

DISCONTINUED- Sensor, PCB X axis Motor, For Flat Ribbon (4 conn) Cable, Rev. 1 (Mercury/Venus/J/R)

SEE REV. 2 KIT: LGCC-29000276GREV2.K

Sensor, PCB Board, X-axis Motor, (4-Amp, MCB-5206), For Braided Cable, with AAS I/O Re. 2 Kit Assembly (X252/X380/Mercury I,  II & III)

Includes AF Cable (20900628) & AF PCB (29000305G)

GCC 29000278  Lens, Collimating - Style 2

(Explorer 30/35/60 DEOS & Mercury, Frame OD 1.1")

*** MUST have LGCC-BK01422.0 Mount, this is not the same as the carriage lens. Normally found after laser tube or in between mirror 1 & 2***

Switch, Limit Lever for Z-axis Table (C180, Spirit Si, Explorer I & II)

Filter, Air Compressor Vapor Filter, Explorer/Spirit

Pulley, X-axis Tension Idle Pulley Assy. For: Explorer\Spirit GX (Left Side)