Control Panel Assembly, Expert-24

GCC 29005951G Holder, Ball Point Pen Holder Assembly w/Package

29005962G, Roller Holder without Damper, Jaguar 101/ RX-101  (Length 49.6" / 126cm)

GCC 29006052G Holder, Blade Holder for Jaguar 1-4/Puma 1-3/BN/SB/BI/EX I/EP(2.0mm)

Carriage Assembly without PCB(EX-24 LX) for GCC Expert 24

Motor, X-axis (GCC Vinyl Cutter Puma II & III (132cm\52" Model)

* 3-Months Manufacturer's Warranty

(BK01359C, Hansen Motor 116-33224-)

Roller, Assist Roller Assembly for GCC Expert 24

Rear platen assembly (For service) for GCC Expert 24

Front platen assembly (For service) for GCC Expert 24

290068060G Panel, Control Panel Assembly for Jaguar II and IV (Without Watchdog) / The Watchdog is usually located on the side of the machine, where the white ribbon cable connects, the control panel and motor run through it.

29005256G - Watch Dog-Interface Converter Board Assembly, Jaguar II/III/IV (no watch dog for J5 series)

290070600G - 2 in 1 Cutter mainboard with Puma II (PLUS) firmware 

Flat Cable Assembly.(104CM) for GCC Expert 24

GCC 290071580G Cut-off Blade Assembly (5pcs) for RX

Roller Holder with Damper, Jaguar 101/ RX-101 (Lenght TIP-to-TIP 50.5" / 128.3cm)

290077800G -DC Motor Driver Board Assembly with L6203, for Puma IV

GCC 290078370G Pen, Ball Point Pen Core. (30pcs per package, 2.95mm diameter of ballpoint pen)

All cutter, need to order 29005951G Ball point Pen holder

Expert DU Roller (For service) for GCC Expert 24

Machine Model: GCC Expert 24

Refurbished MCB, GCC Main Mother Board w/Firmware For Puma III-132 (52" Model) with 3-Months Manufacturer's Warranty
 

MCB, GCC Main Mother Board w/Firmware For Puma III-132 (52" Model) with 6-Months Manufacturer's Warranty
 

For GCC Vinyl Cutter Puma III-60 (24" Model)

For GCC Vinyl Cutter Puma III-60 (24" Model)

Expert LX 24 MainBoard with Expert LX 24 Firmware (from SNM 71538) for GCC Expert 24

Expert 24 MainBoard with Expert 24 Firmware (from SNM 71338) for GCC Expert 24

Roll Base Assembly, Bengal/Expert 24/Expert 24 LX/Puma III/Sable/Expert Pro (a pair)

Expert LX 24 MainBoard with Expert LX 24 Firmware (before S/NM 71538) for GCC Expert 24

GCC 290067750G PPF Pinch Roller Assembly, All Jaguar

MVG-290088750G

MCB, GCC Mainboard Assembly, ARM system + AR-24 Firmware

work with 290088130G and 290071411G (before S/N: V89070)

Expert II MainBoard with Expert II-24LX Firmware for GCC Expert 24

Expert II MainBoard with Expert II-24 Firmware for GCC Expert 24

AR-24 Stand

 290090440G Stand Assembly Including Package for the best choice in a beginner cutting plotter.

Panel, Control Panel Assembly  for Jaguar V

GCC-290093930G  MainBoard for Jaguar V,  183 LX  with 183 LX Firmware  (6mm)

290094260G  AASII Carriage Coard Assembly for ADC function for J5, JV-61LX, 101LX, 132LX, 183LX, Before S/N:S80000

GCC 29001450G Roller Holder Guide Bushes Assembly, U/L/J/N (4pcs/set)

290094450G- Flat Cable Assembly for Puma 60  (104cm)

290094890G - MainBoard for Puma IV with Puma IV 132 LX Firmware

290094900G MainBoard for  Puma IV 60 LX   with Puma IV 60 LX Firmware

290095350G   MainBoard for Puma IV 132 with Puma IV 132 Firmware

290095360G  MainBoard for  Puma IV 60  with Puma IV 60 Firmware

290095480G  Carriage assembly without PCB for Puma (Before S/N: T84000)

290095481G Carriage assembly without PCB for Puma IV 60LX,PumaIV 132 LX  (From S/N: T84000) 

290095661G  Carriage Assembly without PCB for Puma IV 60, Puma iv 132  (From S/N:T84000)

Control Panel Assembly for Puma IV

290096100G  Flat Cable Assembly for 132 Puma model  (181cm)

290096730G -AASII Carriage board assembly ADC /firmware forPuma IV-60LX; Puma IV-132LX  (T84000))

290096770G  Carriage PCB Assembly for Puma IV -60; Puma IV-132 (Before T84000)

290096810G  X-Axis Motor Assembly for Puma4-60; Puma4-60LX

Motor, Y-Axis Motor Assembly, Puma I/II/III 60 &132 /Expert Pro

GCC Vinyl Cutter Puma 4-60, P4-60LX; P4-132; P4-132LX 52

3-Months Manufacturer's Warranty

HTS#: 8466.93.9585

290096840G  X-Axis Motor Assembly for Puma4-132; Puma4-132LX