Magnet, Door Interlock Magnets with cable, No Connectors ea. (For All Lasers)

For: Cutters/Laser excluding AR 24 & iCRAFT

Switch, Laser On\Off Rotating Safety Key Switch (All GCC Machines)

Switch, Emergency Switch (ALL GCC Models)

26100003 GCC- Voltage Regulatory  for Lynx 30 60 and Puma I 30-60- Puma II 30)

Sticker, GCCLaserPro Logo 4"x12.5" (Front of Laser Door, Rev. 2)

Sticker, GCC LaserProi.com Logo (17"x4", Front of Laser Door, Rev. 1)

Sticker, GCC Logo Only, Small, Label (0.6"H x 2.2" L)

GCC 26500059G Blade, 60 DEGREE, for standar sandblast GCB-460SO

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series  

GCC Video:  Use of cutting blades (By Color)

GCC 26500060G Blade, 50 DEGREE, GCB-500, For Cutting Small Letters( 1pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert series

GCC Video:  Use of cutting blades (By Color)

26500112G Pad, Cutting Pad, White, W 6mm, L 10m (for all cutters except i-Craft/AR-24)

All GCC Cutters excluding iCraft/AR24)

Lock, Front Door Latch Lock, Black-Round (Spirit\Mercury\X-series)

Hinge, Window Lid Hinge for ALL GCC LaserPro Machines

Paper, Lens Cleaning Tissue Paper For Laser Optics Cleaning (FKA Kodak Lens Tissue, 50 pck, GCC# 26500192)

Swabs, Cotton Tip Applicators, 6" For Laser Optics (100/pck, GCC# 26500193)

Connector, Pipe, Air Assist Hose, M-5HLH-6 (Mercury, X-Series, Venus)

GCC 265012020G Blade, 60 DEGREE, Green-cap Blade 2.0mm diameter  for cutting thick material, Flock 8.5mm  thick (1 pc)

Model: RX, Jaguar 1-4, Puma 1-3, Bengal, Sable, Expert Series

GCC Video:  Use of cutting blades (By Color)

265016770G GCC-Pad

(W 6mm* L 10m) Black

Blades, GCC, 1 Pcs, 25 Deg., 2.5mm Diam., Yellow Cap, Std Force for Black Plate Holder

App\Models: Cutting Thin Materials or Window Ting \ AR-24/ i-Craft/EXII/Jaguar V/Puma IV

GCC Video:  Use of cutting blades (By Color)

GCC 265017540G Blade, 60 DEGREE, Green Blade 2.5mm diameter  (1pc)

Model: i-Craft / AR-24 / EXII / Puma IV / Jaguar V / RXII

GCC Video:  Use of cutting blades (By Color)

Blade, 60 DEGREE, Blue Cap Blade / 0.25 mm blade offset / 2.5 mm diameter (1pc)

For cutting thin sandblast mask and stencil with friction feed or sprocket feed machine 

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265017560G Blade, 50 DEGREE/ 0.175mm blade offset/ 2.5mm diameter (1pc) Black Cap Blade.

For cutting small text and fine detail. Sharp blade with smallest offset

Model: i-Craft/AR-24/ EXII/Puma IV/Jaguar V/RXII

GCC Video:  Use of cutting blades (By Color)

GCC 265019700G Blade, 45 DEGREE, Red Blade 2.5mm diameter 1pc/pk (w/package), for RXII & J5 series  (This blade is for black blade holder 2.5 it will not work for the gold holder)

GCC Video:  Use of cutting blades (By Color)

Magnet, Switch Assembly, for All Lasers. It is made up of: (1) LGCC-22000045G + (1) LGCC-25700015G

DISCONTINUED- Sensor, PCB X axis Motor, For Flat Ribbon (4 conn) Cable, Rev. 1 (Mercury/Venus/J/R)

SEE REV. 2 KIT: LGCC-29000276GREV2.K

Sensor, PCB Board, X-axis Motor, (4-Amp, MCB-5206), For Braided Cable, with AAS I/O Re. 2 Kit Assembly (X252/X380/Mercury I,  II & III)

Includes AF Cable (20900628) & AF PCB (29000305G)

GCC 29000278  Lens, Collimating - Style 2

(Explorer 30/35/60 DEOS & Mercury, Frame OD 1.1")

*** MUST have LGCC-BK01422.0 Mount, this is not the same as the carriage lens. Normally found after laser tube or in between mirror 1 & 2***

Switch, Limit Lever for Z-axis Table (C180, Spirit Si, Explorer I & II)

Filter, Air Compressor Vapor Filter, Explorer/Spirit

Pulley, X-axis Tension Idle Pulley Assy. For: Explorer\Spirit GX (Left Side)

PCB, Auto Focus PCB, For Braided Cable, PC00154A, Rev. 2 ( X380\X252\Mercury I & II/Venus/Explorer\C180-I)

Pulley, X-axis (Right-Sprockets\Active), Venus

Mirror, #1, 1.0" Diam. (Explorer II-DEOS Tube)

29000864  GCC -Mainboard for Lynx 60/30 and Puma I

29000866G-Pen Force PCB Assembly for Lynx and Puma I

29000869 GCC-Carriage PCB  for Lynx 60 -132  and Puma I -60

29000871G - Control panel PCB Assembly for Puma I & II

Sensor, PCB, Rotary Attachment Sensor PCB

Flange, Roll Holder Flange, for All Cutter Models (set of 2)

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

GCC-29001101G Lens, 1.5" FD-Purple, Spot Size: .003",

Machine Models: Mercury I, II, III \ Venus, MG380-HYB \ X380 \ X252

Lens, 2.5" FD-Gold, Mercury\\Venus, Spot Size: .007" For: Mercury-ME-25/ME-40V SN before T90xxx, ME-12/ME-30V/ME-40Vi/ME-60Ti SN before U90xxx, X252, X380, MG380Hybrid SN before U90xxx, Venus II SN before T56191

GCC 29001104G Lens, 4.0" FD-Red , Spot Size ~.012"

Machine Model: Mercury (ME-12/ME-40Vi/ME-60Ti SN before U90xxx, ME-25/ME-40V SN before T90xxx), Venus II SN before T56191

* Best use for cutting and rotary attachmenet

Roller, Small Black Roller, Pack of 2 Set (Mercury/Venus/X252,X380, J/L & Vision LaserPro, BK01321) Bottom X-axis or Side Y-Axis

Pin, Auto Focus Pin Assembly, 6" Cable For Explorer,  Mercury,X252, Venus II SN before T56191 (BK01325E)

Roller, DU Roller Assembly-Top X-axis Pkg 2 (Mercury, Venus, X252, X380, MG380-Hyb, X500- BK01330, 14-pcs)

Mirror #1, 0.75" Dia. for Mercury/Venus/Spirit/J and Explorer 1 (Rev. 1)

Pulley, Y-Axis idle Pulley Assembly (X380\X252)