Pre filter cyclone for dust collectors

Acts as a dust separator and pre filter cyclone that pushes debris and dust to the bottom container

Features:

• Easily Integrates Into Any Dust Collection System
• 5 Gallon Removable Debris Capture Bucket
• Highly Durable Molded Resin Design
• Scientifically Tested and Proven to Separate Dust
  • A 3M/Georgia Tech Study
• Up To 97% Cyclonic Separation Rate of Particles Down to .3 Microns
• 95% Effective at Precious Metal Reclamation
• Inlet/Outlet Ports – OD: 4″- ID: 3.75″

LIVE ONLINE TRAINING (up to 3-Hours)

Jorlink now offers an efficient Interactive, cost effective way to train or update your skills via the Internet One-on-One. Everyone knows that face-to-face training is the most effective, but it's time consuming and expensive. Now you have a new option; with Jorlink's Interactive Internet e-Demo, e-Training and Tele-Conference service we can do training with you at your premises and a live instructor at the other end whenever is more convenient to you

Phase 1 (45+ min): Discovery, learning about your business, marking\engraving needs.  Setup PC\Software\Machine Configuration.

Phase 2 (45+ min): Learning about the software, creating jobs, highlights of machine.

Phase 3 (45+ min): Q&A, Advance questions, Running Production Job

* Weekend hours may be available with for an additional $50 to block of time
** Remember, 3-Hours is NOT to compare to an onsite Setup\Training, we will do our best at helping you understand your equipment.  If more hours are needed, let us know so we can quote additional time.

Adapter, Vacuum Assy Adaptor EGX-350 Kit w/Hose & Vacuum Duct

Adapter Vacuum Assy (Product #1000003262) is intended for use in the EGX-350. The adapter connects the hose that runs from the machine to the vacuum and is sold as a kit from Jorlink. The adapter should be replaced when damaged. The adapter is included in the chip-removal system (US-CHIPSYS-C).

AS-5 By Roland, Adhesive Sheet Hold-down System (Pack of 5)

Bag, Vacuum Filter Bag (3-pk) for Chip Removal System
Filter bag (3-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A3
This product #US-LN10 is a set of 3 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30/30A, EGC-350/360, EGX-400/600 and DE-3 engravers.

Bag, Vacuum Filter Bag (5-pk) for Chip Removal System
Filter bag (5-pk) for chip removal system
PRODUCT NUMBER: US-FLTRBAG-A5
This product #US-LN10 is a set of 5 replacement filter bags for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bag, Vacuum Filter Single Bag (1-pc) for Chip Removal System
Filter bag (1-pc) for chip removal system
This product single replacement filter bag for the Chip Extraction System (Product #US-CHIPSYS-C). The Chip Extraction System is used with EGX-20/30A, EGC-350/360 and EGX-400/600 engravers.

Bearing Assy. EGX30, EGX30a or CS-20, (3-Pack)

Belt, Roland Spindle EGX20/EGX350/EGX400/EGX600, A-1CEBRF 5 x 170

Belt, Spindle Belt Roland EGX300\PCN2300

The Bankoran Maru Belt (Product # 11929103) is used with the PNC-2300 and EGX-300 engraver. This spindle belt ensures the spindle moves smoothly for accurate engraving.

Belt, X-Axis Roland EGX400 & EGX600

Belt, Y-Axis Roland EGX600 (150S2M569LW-C)

Board, XZ Board Ass’y, EGX400/600 (W589356070)

Brushes, Motor, Roland Vacuum Chip Removal System

Clamp-Table, Short (each)

Collet, 1/4"(6.35mm) for: Roland DGA EGX350/EGX400/EGX600, MDX-40, SRM-10, JXW-10
This 6.35mm Collet (Product #ZC-23-635) is for use with bottom loading end mills. It is compatible with the following Roland DGA devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 1/8", ZC-23-3 Solid Split Bottom Load Collet 3mm (.125") For: DE-3, EGX300/EGX350/EGX400/EGX600

This 3mm Collet (Product #ZC-23-3) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, Split, Top Load Collet 3.175mm PNC2300A (1,8") For: EGX300/ EGX350/EGX360

This 3.175mm Collet (Product #ZC-23-3175) is for use with bottom loading end mills. It is compatible with the following Roland devices: JWX-10, EGX-300/400/600, MDX-40, and SRM-10.

Collet, 11/64", Solid Bottom Load Collet 4.36 MM (.171") 

For: DE3/EGX350/EGX400/EGX600, Half Round Cutters

This Collet Holder (Product #1000003391, alternative to discontinued # 21655242) is used with standard cutting tools in the EGX-350. It should not be used with pass-through collets. This holder prevents the cutting tool from dropping through the spindle and damaging the engraving material.

Collet, 11/64", ZC-E436 Solid Bottom Load Collet (.171") For EGX300\EGX350\PNC-2300A\EGX400\600, Burnishing - Diamond Guide

This Bottom Loading Burnished Guide (Product #ZC-E436) is intended for use with the Roland EGX-Series engravers. The guide is designed for diamond drag applications and must be used with diamond engraving burnishing tools.

Control Panel, EGX400/600

Ring, Depth Noze-Metal (Thick) For: EGX300\EGX350\EGX400\600\ZDN-200

 Comparison Chart

Fonts

EngraveLink Foundation Ver. 10 by CADlink for Rotary Machines

EngraveLink, Version 10, Same as EngraveLab Foundation with Extra Features which Includes: Roland & Meistergram Driver Support with Meistergram D14 Software file Import, Badges & Arc Feature. MSRP $795.00 

Provides you with a solid beginning to computerized engraving with tools for all your basic engraving needs.

Begin with industry-leading import filters, extensive file format support includes DXF, EPS, AI and PDF. Enhance your basic text with imported graphics, and improve your engraving efficiency with single-line engraving fonts. Output to a variety of Rotary Engravers, Vinyl Cutters, and CNC Machines.

Filter, Water Filter, Activated Carbon for Roland EGX360

Fonts, Monogram Fonts True Type for Windows or Mac (SW DOWNLOAD)

Jorlink's compliments with the purchase of a  Rotary or Laser Engraver

Gear, Pulley, Gear EGX30a & EGX30, Y-Drive (FD31.1558 +GEAR S190 CS-20, 30mm OD-Metal & 58mm OD Plastic White-Gear)

Holder, Inter Lock for Roland EGX360

Jig, Roland Metaza MPX-95, MPX-90. MPX-80 Center Vise

Lever, Lock Roland EGX360

Motor, Replacement Motor – 97047 (Replaced Blue Dot # 97005 & 97038)
For: RRUSCHIPSYSC 

Motor, Spindle For EGX400/600

RR22435425 Motor, XY Axis EGX400 / EGX600 24DCv

RR22435426 Motor, Z Axis EGX400 / EGX600, Roland Rotary

Motor, Z-axis Motor For Roland EGX30a

Roland DGA EGX350

Z-axis Motor

Nose Cone Adapter (2pcs), For: DE3, EGX350, EGX400, EGX600 Teflon Spindle Cone
(SRP $36/ea)

Panel Board 1 Right Side Bottom EGX-20, Button Control (#34 Image)

Panel Board 2 Right Side EGX-20, Knob Adj. Control (#33 Image)

Plate, Adjust Nose, Micrometer Plate for DE3 & EGX350

RR31049175AS Screw, wire pin locking screw (M4*20 NI) EGX350

Roland Notes: This machine has been discontinued

Spindle, Roland EGX20, 1/8" Assy. (90 Day Warranty)

Spindle, Roland EGX400/600, 1164" Assy. w/o Collet or Micrometer (90 Day Warranty)

Note: After you replace the spindle, you need to run it without any load with no tool or collet installed for approximately 20 minutes at 15000-RPM

Switch, Cable-Assy, Cover SW1 EGX360

Switch, Cable-Assy, Cover SW2 EGX360

Switch, Emergency Stop Cable-Assy EMG EGX400 / EGX600

Switch, Y-Axis Limit SW Assy for EGX350

CABLE-ASSY,LIMIT-SW-Y EGX-350

Switch, Z-Axis Cover, Z-axis Limit & X-axis Limit, Cable Assembly Sensor, EGX400\600

Switch, Z-Axis Limit SW Assy for EGX350

CABLE-ASSY,LIMIT-SW-Z EGX-350

Table, EGX30A & EGX30, Surface Table Flat

This T-Slot Table (Product # ZTT-35) is an optional accessory for use with third party vises and fixture. This table is compatible with the EGX-350 an DE3

Table, Vacuum Table (Product # ZV-23A) is an optional accessory for use with the Chip Extraction System (Product #US-CHIPSYS-C). This table is used as an alternative to adhesive sheets for holding down flat plastic material and is compatible with the EGX-350 engraver

Instructions

Tray, Water Tray Cleaner Box for Roland EGX360

Vacuum Adapter For Roland EGX400\600, ZAD-600
This Vacuum Adapter (Product #ZAD-600) is to connect the machine to the hose of the vacuum. This item is included in the Chip Extraction System (US-CHIPSYS-C). This adapter is for use with the EGX-400/600 engravers.

Vacuum, Chip Extraction Sys. UltraQuiet, 1/2hp w/accumulator

Key Features

• This chip removal system is quiet and efficient to use in any shop.
• The vacuum not only keeps your works space clear of debris, but it also filters 99.99% of dust out of the air!
• The systems are also self-contained so it can be used to reclaim precious metals.
• The vacuum hose supplied slips onto the vacuum connection on top of the unit and the other end connects to the collection device desired.
• The ideal location for the US-CHIPSYS-C is under the bench where the user works.

US-CHIPSYS-C Specifications

• Usage: Single station use for collecting dust at 1.5” diameter workstation
• Speeds: Single Speed
• Size: 14.Lx10.Wx12.H
• Power Requirement: 115 VAC 5A
• Overload Protection: Resettable circuit breaker included.
• Sound rating: 53db on High
• Dust Collection: Collects 99.99% of all dust (filter rated at 95% @ 1 micron)
• Motor Rating: High-Performance ½ Horsepower Motor

Vise, Fixture Kit (Vise, Pin Jig, Pen Fixture, Ruler Bar Fixture, 2 Medallion/Seal Fixtures) For: EGX-300/350/360/400/600

Vise, Machine Center Vise (PNC-2300/EGX-300/EGX-350)

Wire, X-Axis CS-20 EGX30 (ea, 1 on Machine)