Anonym / Friday, September 10, 2021 / Categories: Technical - GCC, Laser Tips, Laser Marking Tips, Laser Marking FAQ's FAQ - Will it shorten the life time of my laser tube if the power setting is at 100%? Will it shorten the lifetime of my laser tube if the power setting is at 100%? THIS IS A MISCONCEPTION! Perhaps you will feel that setting the laser tube at its power limit (power set to 100%) might bring negative consequences, especially in regards to the lifetime of laser tube. Indeed, for most industrial products this critical operation might shorten its service life. However, we have to realize one thing first - for a laser tube, outputting at a 100% level is not a kind of critical operation, too high of an unstable current is. While the power supply of the laser tube is outputting a regular and stable current to the laser tube, no matter which power level you are using, it won’t affect the service time of the tube even if you set the power level at 100% in the driver. Previous Article FAQ - Does the purity of air (Oxygen or Nitrogen) affect the laser cutting quality? Next Article FAQ - Should there be a gap at the joint of cutting lines after the mainboard is replaced? Print 703 Rate this article: No rating Tags: GCC FAQ laser tube settings Please login or register to post comments.