High Speed Laser Engraving on Glass and Plastic
 

For: Spirit Si, SGX, Explorer

Bearing, Z-Axis-Bottom Leadscrew, Ball, .250ID, .625OD, .69 Flange Each (All Meistergram \ HSquare Machines) Sold as Kit of 2 for $48.00

20600035G  Connected belt for Y axis for Puma  (2GT-T40-W9)

Belt, Meistergram\HSquare Spindle, 18.75" LG, 1/8" Dia. (1612, 2412, 2818-2 Belt System)
Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 23" LG, 1/8" Dia. (912, PA912, 1912, 2818 Stepper)

Buy Qty of 2 for $35

Belt, Meistergram\HSquare Spindle, 5.75" LG, (2818-2 Belt System)

Belt, Roland Spindle EGX20/EGX350/EGX400/EGX600, A-1CEBRF 5 x 170

Cable Assy, HCL-T5-1MP-BL EGX400/600

This replacement cable (Product #13509781) is for use with the EGX-400/600 engravers. It connects the machine to the controller, also known as the handy panel.

1704002 Purex , IFume 400I - Orange

Purex Commercial Grade Fume Extraction System for Hand or Machine Soldering
 

30-Minutes 1-On-1 Diagnostic Phone Call Support

* Recommended for basic troubleshooting, driver installation issues, Q&A, parts replacement instructions, Pre-Onsite Troubleshooting
** SPECIAL Rate for Educational & Non-Profit Organizations as well as Service Personnel (1st Responders, Teachers, Retired Personnel) 

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer:

(a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to thirty minutes (30 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

60-Min. 1-On-1 Diagnostic Troubleshooting Phone Call (Hardware\Electronics\Laser Tube Issues)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to fifty minutes (60 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

90-Minutes, 1-On-1 Diagnostic Troubleshooting Phone Call, Level II Tech.  (Hardware\Electronics\Laser Tube Issues\Software, Firmware, Driver Troubleshooting)

(After your purchase, a Jorlink representative will be in touch to arrange the meeting time and to provide you with a meeting link. Please be sure to select a preferred timeframe)

Disclaimer: (a) We will do our best to troubleshoot and evaluate the problem and attempt to reach a solution. This will require clients to adjust and repairs on their own with our remote assistance and instructions. Parts may need to be purchased with a no-returns policy unless you have an active membership in our yearly 365-Support program.

(b) A per event/case call will be limited to ninety minutes (90 min Max); if the problem has not been resolved within this time, we will provide other suggestions for on-site service or additional paid services.

(c) We recommend having a person on-site with experience in the Electro-Mechanical field assist as there is electrical testing with a digital voltage meter that may be required.  CAUTION MUST be taken when around electricity or working to measure laser tube power, use protective eyewear or any other safeguards.

(e) REPAIRS ARE NOT GUARANTEED, please discuss with your Sales Rep. on upgrades and credits for our services with any trade-in equipment.

EXPERT II-24

Cutting Plotter, GCC Expert II, 24", One-year Limited Manufacturer's Parts

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.

For detailed information please visit: GCC World

EXPERT II-52LX
Includes Automatic-Aligning System

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.
 

For detailed information please visit: GCC World

EXPERT II-52

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.
 

For detailed information please visit: GCC World

EXPERT II-24LX (MVG-EXPII-24)
With Automatic - Aligning System

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.
 

For detailed information please visit: GCC World

Expert Pro 132, 52 inch

Powered by a digitally controlled servo system, the Expert Pro produces eye-catching graphics with up to 33 ips (849mm/sec) cutting speed, 400g of cutting force and five meters (16.4 feet) of tracking ability. Expert Pro is available in two sizes, 132cm (52 inch) and is the best choice for advanced users to do the vector cutting applications. The versatile Expert Pro sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.

For detailed information please visit: GCC World

Expert Pro 60, 24 inch

Expert II Series is the best choice for beginners and provides sign makers with optimum speed, superior quality, solid reliability and unmatched value. Expert II produces eye-catching graphics with up to 27.8 ips (25 ips for EX-52 models ) cutting speed, 350g of cutting force and three meters (9.84 feet) of tracking ability. The versatile Expert II Series sets a new benchmark for value, offering high accuracy and reliability at an unbelievably affordable price.

For detailed information please visit: GCC World

Filter 200053, Purex Pre-Filter, Laser Safe

Special Order

Export Notes: HTS Code: 8421.99.0180, Made in the UK-England.
Freight Class: 250, NMFC# 069100-03

Shear, 12" Modular- Combo (Plastics & Metals)

* Select between Metric or Imperial Guide Rullers

Machine model: I fume 400i Violet, Ozone/ 400iPVC / DPX2000
Filter Notes: Pack of 4 / Replaced 200037
Export Notes: HTS Code: 8421.99.0180,  Made in the UK-England
Freight Class: 125, NMFC# 069100-03

200310 Purex Pre-filter - Chemical absorbent pad, 5000i  (4 pack)

Filter Notes: F5, Pack of 4, Replaced 200029
Machine Model: 5000i 
Export Notes: HTS Code: 8421.99.0180,  Made in the UK-England
Freight Class: 125, NMFC# 069100-03

• Pad pre-filter
• Extends the life of the main filter by capturing larger particles before they reach the HEPA filter
• Fits neatly under the main filter
• Graduated fibre matrix delivers excellent particle capture capacity
• Ideal for low volume applications or where small amounts of particles are produced
• Captures particles to 5 micron at efficiency of 40 - 60%

Filter Notes: Grade F8/F9 Pack of 4 Pre-Filter 200522 / 200096
Export Notes: HTS Code: 8421.99.0180,  Made in the UK-England
Freight Class: 125, NMFC# 069100-03

Pre-filter - Exhaust pad, FumeSafe (same as 200096)

• Pad pre-filter
• Extends the life of the main filter by capturing larger particles before they reach the HEPA filter
• Fits neatly under the main filter
• Graduated fiber matrix delivers excellent particle capture capacity

For Help Finding Filters

Wheel, Pinch Roller Wheel, All GCC Cutters

Air Nozzle, Standard Air Assist, Explorer (BK01459A)

Nozzle, Air nozzle. GAIA, GAIA II, X500LS, X500RX  

Blades, GCC, 5 Pack, 25 Deg., 2.0mm Dia., Yellow Cap, Std Force for Gold Plate Holder
App\Models: Cutting Thin Materials or Window Ting,  \ RX/Jaguar IV/Puma III/Expert series

GCC Video:  Use of cutting blades (By Color)