High Speed Laser Engraving on Glass and Plastic
 

Compressor for Air Assist-High Volume, 110Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage:100~115vac
Power Consumption:270Watt
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist-High Volume, 220Vac,3.18 CFM

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for production enviroments where laser will be operating eight (8) hours or more.

SPECS:
Voltage: 220vac
Power Consumption: 270 watts
Hz:50/60
Air capacity:86~95 L/min
Outlet pressure is 7~10 kg/cm2 (100~142psi)

Compressor for Air Assist, 115Vac-Low Volume, 58PSI

Low volume Air Compressor for laser engravers; help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life. Recommended for LOW production enviroments where laser will be operating less than four (4) hours.

Compressor for Air Assist-Medium Volume Laser Engraving Applications, 115Vac, 1/6HP Oil Free Twin Cylinder, Max. 80PSI (Working Pressure: 0-60PSI, Flow: 1.14CFM)
One (1) Year Manufacturer's Warranty if purchased.

Speed Control, Purex Upgrade Pack-1
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
 

Kit Notes: 125mm - 80mm x 3.0m Connection kit

Machine Models: 400i/ 400i Dye Sub/ I Fume Orange,Violet,Green and Red 

Export Notes: HTS Code #: 8421392090, Made in the UK-England

• Diameter of customer's port = 125mm

• Length of hose = 3.0m

• Purex machine inlet diameter = 80mm

Kit Notes: 75mm - 75mm x 1.5m Connection , Fume Buster

Export Notes: HTS Code #: 8421392090, Made in the UK-England

Notes: 100mm - 150mm, Hose Kit for 3 outlet laser

Export Notes: HTS Code: 8421392090, Made in the UK-England

Switch, Remote ON\OFF For Purex Units, Foot Switch, 5M Cable

Machine Model:  Alpha / FumeCube
Export Notes: HTS Code: 8544.42.9090, Made in the UK-England
105114 Remote -Systems: Digital

*Interfacing Cables Brochure *

Machine Model: 800i
Kit Notes: 3.25m x 100mm to 150 mm

Export Notes: HTS Code: 8421392090,  Made in the UK-England

Manuf # Contains: 1 x 100mm Female Coupling | 1 x 100mm Equal Tee | 4 x 90-120mm Hose Clips | 2 x 3m x 100mm Flexible Hose | 2 x 150-100mm Reducers | 2 x 0.25mm x 150mm Flexible Hose | 4 x 135-165mm Hose Clips

 

Panel, Control Panel Assembly  for Jaguar V

MCB, GCC Main Mother Board Type 5272-v1 Green\Red (Mercury III)

GCC-290093930G  MainBoard for Jaguar V,  183 LX  with 183 LX Firmware  (6mm)

290094260G  AASII Carriage Coard Assembly for ADC function for J5, JV-61LX, 101LX, 132LX, 183LX, Before S/N:S80000

290094450G- Flat Cable Assembly for Puma 60  (104cm)

GCC 29001450G Roller Holder Guide Bushes Assembly, U/L/J/N (4pcs/set)

Machine Model: Spirit / Spirit LS-from P53141 / Spirit GLSH CO2 / S400

290094890G - MainBoard for Puma IV with Puma IV 132 LX Firmware

290094900G MainBoard for  Puma IV 60 LX   with Puma IV 60 LX Firmware

LED's, Lamp Board (Qty4) Upgrade Kit for: Spirit/Spirit LS/Spirit GE/Spirit GX/GLS/S290/S290LS

* This is a replacement for old style LED's #: LGCC-29004053G
** Replacement LED's New Style Part #: LGCC-202003460G

290095350G   MainBoard for Puma IV 132 with Puma IV 132 Firmware

290095360G  MainBoard for  Puma IV 60  with Puma IV 60 Firmware

290095480G  Carriage assembly without PCB for Puma (Before S/N: T84000)

290095481G Carriage assembly without PCB for Puma IV 60LX,PumaIV 132 LX  (From S/N: T84000) 

290095661G  Carriage Assembly without PCB for Puma IV 60, Puma iv 132  (From S/N:T84000)

Control Panel Assembly for Puma IV

290096100G  Flat Cable Assembly for 132 Puma model  (181cm)

Sprinkler, Flame Sprinkler System for: Spirit  Si, SLS, SGLSHYB, Mercury (MSRP $714)
Laser cutting and engraving operations using the flame sprinkler system protects the operator, machine, and the work products from potential fire hazards. During the engraving process, flaming may occur when working with combustible or easily-flammable materials, such as paper or wood. The flame sprinkler system is an optional item that automatically ejects gas to extinguish flames when they reach 68°C/155°F moments after the onset of the fire.

Response element and temperature: Fusible alloy@68°C (155°F)
Working pressure range: 0.1-1.2Mpa
Bulked coupling: 1/2” PT
Recommended Gas: CO2/N2/Dry Powder

290096730G -AASII Carriage board assembly ADC /firmware forPuma IV-60LX; Puma IV-132LX  (T84000))

290096770G  Carriage PCB Assembly for Puma IV -60; Puma IV-132 (Before T84000)