X
Machine FinancingLearn moreImage Alt Text
X500-III Pro

product part

  

RoHS Compliance

All GCC products are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (PB free). GCC will continue to concern and provide environmentally friendly products to protect the earth for our further generations.

Laser Beam Expander  

Beam Expander

X500III Pro includes one 1.6X beam expander for uniformity of line width that presents outstanding quality and reliability.

 

Drag-N-Play

The “Drag-N-Play” feature greatly reduces complex setup procedures and allows users to directly drag the lens carriage to the starting point of a job.

 

New Design of X500III Pro Carriage 

Advanced X500III Pro carriage design to increase the stability of carriage movement, elevate the performance of X500III Pro.

 

Closed-loop DC Servo Technology

DC servo motor applies a higher quality motor and controller to send commands to the motors and utilizes an encoder to feedback location values to the controller, so the motors always verify their positions. This continual link allows the motors to run faster with higher acceleration and speed that the laser engraver can cut or engrave and also you can move the laser carriage to any position and resume working precisely. Adopting the servo control technology, GCC LaserPro high-speed closed-loop DC servo motor technology guarantees precise and fast carriage movement with exceptionally accurate outputs.

 

Versatile Engraving and Cutting Capability

X500III delivers high cutting quality with LaserPro’s unique Laser firing control technology. X500III can cut through 20 mm acrylic in a single pass. Better than that, the grayscale technology allows X500III to process 256-level grayscale images with vivid engraving quality.

 

Pass-through Front & Rear Doors (Optional)

Convenient front and rear door open design enables the loading of extremely long working pieces with ease and extends business flexibility.

 

SmartCENTER™ (Patented)

The super user-friendly SmartCENTER™ function helps end-users to easily and automatically locate the center point of objects of any shape vastly eliminating tedious setup time.

 

SmartACT™ (Patented)

Ground-breaking technology that reduces the ramping process and job running time to boost productivity.

 

Programmable Origin Modes

Easy-to-use multiple position modes allow the operators an effortless way to set up a job with Drag-N- Play. Repetitive workflows can be drastically simplified by relocating the origin position to any desired location.

 

Intuitive Control Panel Interface

A control panel with coherent hot-key design and graphic icon displays that allows you to directly change the laser parameter setting set jobs to repeat unlimited times, queue job, delete jobs, and more.

 

Innovative Windows Driver

LaserPro Windows-based driver provides powerful functions, such as SmartCENTER™, Air Assist by Pen, Dithering Patterns, and more to reduce set up time and make easy adjustments to achieve marvelous output quality.

 

Knife-shaped Cutting Table

Unique cutting table with tipped bars that can be easily adjusted without tools to create different levels of working depths. The cutting table of X500III reduces laser reflections and delivers a clear cutting edge.

 

SmartLIGHT

A built-in LED light module illuminates the working space and makes every engraving detail easy to see.

 

Key Switch & Emergency Stop

Key switch safeguards the machine from unauthorized use. A prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.

 

Job Preview Function

The GCC LaserPro laser engraver all series printer driver features a job preview function that previews graphics before the official laser printing process. One of the highlights of this feature is that it provides an estimated working time*.
The estimated working time is an easy tool for operators to know in advance as to how much time will be needed to finish the job for better job management; it is also convenient for a shop to provide a quotation for its laser services.

 

SmartPRINT™ (Optional) 

The GCC LaserPro SmartPRINT™ software features powerful functions, an intuitive interface, and embedded GCC LaserPro laser parameter setting for both MAC and Windows users....MORE
SmartPRINT™ Flyer Download

 

Purex Fume Extraction System

Purex Fume Extraction System

GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line LaserPro laser engraving and cutting systems. These Fume Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Applicable to all GCC LaserPro engravers, the Purex Fume Extraction System represents the latest invention in the exhaust extraction and smoke reduction technology for all types of applications. Noise-free operation, high vacuum capacity, compact design and long life expectancy are just a few of its outstanding features. Powered by a maintenance-free, continuous-running turbine, the Fume Extraction System, which is CE-compliant, ensures personnel safety and legal compliance.

 

 

 

X500 III Rotary Attachment


 

Pass-through Door Switch Module

The Pass-through Door Switch Module is designed to activate the laser when the door is open which conforms to the CDRH safety required by FDA.

 

Aluminum Grid Cutting Table

Aluminum Grid Cutting Table

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with a reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by a down vacuum funnel exhaust. Rather than handling rigid materials, the aluminum grid cutting table also helps to fix flexible materials with the aid of a down vacuum to keep constant focus distance and consistent cutting results. A clean and better cutting quality is achieved from this technique.

Aluminum Grid Cutting Table

Aluminum Grid Cutting Table

The aluminum grid cutting table is an ideal pal for laser cutting. It lifts the workpiece off the work table from hitting by laser reflection while supports it with a reinforced aluminum grid design. The dust and vapor created during laser cutting are then taken away effectively through the grid by down vacuum exhaust (suggested using SmartBOX™ together). Rather than handling rigid materials, the aluminum grid cutting table also helps to fix flexible materials with the aid of down vacuum SmartBOX™ to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

Air Extraction System - T500, X500III

Air Extraction System - T500, X500III

To accomplish strong vacuum ventilation requirements for industrial application, GCC LaserPro X500III and T500 are recommended to supply a more powerful air extraction unit with an 8” opening to reach the optimum cutting quality. The air extraction system powered by a maintenance-free turbine takes out the fume and dust generated during laser processing efficiently and effectively, leaves a quality cutting edge and clean operation environment.

External Interface Control Board

External Interface Control Board

The External Control Interface Board is an optional item that allows users to set up GCC laser machines for communication with external devices such as odor reduction units, robot arms, and others via a 5V or 12V signal to form an automatic production line. Another useful practice applies in certain working environments when users are required to set up an extra remote interlock control or when laser machines are allowed to be switched off if a security device is triggered.

Supporting Pin Kit

Supporting Pin Kit

This design can firmly hold up the working object preventing it from falling off; moreover, it can effectively reduce the possibility of the reflected laser hitting the working object.

Air Compressor

Air Compressor

A specially designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must keep lenses and mirrors clean to promote longer laser life.

SmartGUARDâ„¢ Fire Alarm (Patented)

SmartGUARD™ Fire Alarm (Patented)

Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut down the operating system immediately.

Honeycomb Table

Honeycomb Table

A honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the workpiece off the work table from hitting by laser reflection while supports it with a honeycomb cell design. The dust and vapor created during laser cutting are then taken away effectively through the honeycomb cell by a down vacuum funnel exhaust. Rather than handling rigid materials, the honeycomb table also helps to fix flexible materials with the aid of a down vacuum to keep constant focus distance and consistent cutting results. A clean and better cutting quality is achieved from this technique.

X500III Pro
Laser Source 100W 130W 150W
Sealed CO2 Laser
Laser Cooling Water Cooled
Working Area w/o Honeycomb Table 1300 x 916 mm (51 x 36 in.)
with Honeycomb Table 1280 x 896 mm (50.3 x 35.2 in.)

Max. Part Size

(L x W x H) 

w/o Cutting Table 1346 x 916 x 55 mm (52.9 x 36.0 x 2.1 in.)
Doors Open 1346 x ∞ x 30 mm (52.9 x ∞ x 1.1 in.)
with Honeycomb Cutting Table 1240 x 818 x 30 mm (48.8 x 32.2 x 1.1 in.)
with Grid
Cutting Table
1325 x 889 x 30 mm (52.1 x 35 x 1.1 in.)
Dimensions 1900 x 1400 x 1200 mm (74.8 x 55.1 x 47.2 in.)
Driving Motor Closed-loop DC servo control
Maximum Motor Speed 40 IPS
Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
Engraving Capability 256-level grayscale image processing capability
Distance Accuracy 0.254 mm or 0.1% of move, whichever is greater
Z-Axis Movement Manual
Resolution (DPI) Available 125, 250, 300, 500, 600, 1000
Interface 10 Base-T Ethernet
USB Type-A 2.0  – For USB storage (Max. 32GB capacity, FAT file system) 
USB Type-B 2.0  – For connecting with the computer 
Focus Lens Standard 2",Optional 3" Standard 3",Optional 2"
Display Panel 4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into a memory buffer, setup, and diagnostic menus.
Safety Class, I Laser Product Compliant with EN60825
Class II Laser Product Compliant with CDRH
2006/42/EC Machinery Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door module
Cutting Table

Knife-shaped cutting bars with down vacuum and scrap collecting funnel

Facility Requirements
Operation Voltage 200-240VAC, 50/60Hz auto-switching, Max.10A
Fume Extraction System An external exhaust system with a minimum flow rate 2000m3/h (CFM 1177 ft3/min) is required, 
3.8kPA negative pressure (Pure-Air PA-2000FS-IQ @ 8" exhaust port)

*Speed is not equal to throughput. See dealer or visit www.GCCworld.com for more details.
Specifications are subject to change without prior notice.
*The flow rate is determined by a default fume extraction system; the flow rate may vary due to a di fferent fume extraction system.​

Warranty Policy is Effective from 01/01/2019

GCC, a global forefront equipment-manufacturing provider in the visual communication industry, is pleased to announce New Product Warranty Policy. The warranty period for new qualifying machine purchases will be counted from Installation Date provided the following conditions are met.

The condition and workflow have been displayed below :

  1. New Product Warranty Policy is applied to machine shipped from GCC in 2019. 
  2. When the machine sold to end user, it is important to advise end user immediately to link to the GCC’s club http://gccf.gcc.com.tw/gccclub/login.aspx  to sign up and input the machine Serial number and their basic data to activate the machine warranty. Then the warranty of this specific serial number of machine will be changed from the invoice date to data input date (i.e., Purchasing Date that end-user purchases machine) 
  3. However, the max. Periods for end user to activate the machine warranty is 180 calendar days from invoice date.  If machine fails to be registered within this 180 days period, there will be no any extended warranty and the machine warranty period will be by default still from the invoice date.
  4. Warranty for Consumable item, Optional item and Spare parts are counted from GCC Invoice Date without change.

A Picture Conveys a Thousand Words

Glass vs. metal laser tube 


 

 

 

Laser Engraving Solutions for Every Application

At Jorlink, we understand that different projects require different tools. That's why we offer a diverse selection of laser engravers and cutters, including:

  • CO2 laser systems for versatile material processing
  • Fiber laser engravers for metals and high-speed marking

Choosing the Right Laser Engraver

Selecting the perfect laser engraver involves considering several key factors:

Material Compatibility

Ensure the machine can handle the materials you work with most frequently.

Work Area

Consider the size of your typical projects to determine the appropriate engraving bed dimensions.

Power Output

Higher wattage generally means faster cutting and deeper engraving capabilities.

Precision

Look for machines that offer the level of detail your projects demand.

We proudly feature the GCC Laser Pro series, known for its exceptional performance across various applications.

Advantages of GCC Laser Engraving Machines

GCC Laser Pro engravers offer numerous benefits:

  • Consistent, high-quality results across materials
  • User-friendly interface for seamless workflow integration
  • Scalable solutions to grow with your business
  • Robust construction for long-term reliability

These machines are designed to boost productivity and enhance the quality of your engraving projects, regardless of your industry or expertise level.

How to Select Purchase the Best Laser Engraver 

  1. Entry-level machines perfect for beginners and small businesses
  2. Mid-range options with enhanced features for growing operations
  3. High-end industrial systems for large-scale production

Expert Guidance and Support

Our team of laser engraving specialists is committed to your success. We offer:

  • Personalized consultations to assess your needs
  • Comprehensive training on machine operation and maintenance
  • Ongoing technical support to ensure optimal performance

Contact Jorlink to Buy Your Laser Engraver

Ready to elevate your engraving capabilities? Contact Jorlink to explore and buy laser engravers and cutters. Our staff will guide you through the selection process, ensuring you find the perfect machine for your needs and budget.

Jorlink USA, Inc,
3714 Alliance Dr., Suite 100
Greensboro, NC 27407
TEL: (336) 288-1613
eMail: sales@jorlink.com

M-F 9am-5pm EST 
Facebook Linkedin twitter Instagram YouTube
Jorlink USA, Inc. BBB Business Review